Azlan Logistics Limited SB-900P Manuale Utente

7

Note:
-   Installation must be carried out by qualified 

personnel only. Incorrect assembly can 
result in severe personal injury and property 
damage (if you intend to install this product 
yourself, you must check for installations 
such as electrical wiring and plumbing 
that may be buried inside the wall). It is the 
installer’s responsibility to verify that the 
wall will safely support the total load of the 
unit and wall brackets.

-   Additional tools (not included) are required 

for the installation.

-   Do not overtighten screws.
-   Keep this instruction manual for future 

reference.

-   Use an electronic stud finder to check the 

wall type before drilling and mounting.

1.  Drill 4 parallel holes (Ø 3-8 mm each 

according to wall type) in the wall. The 
distance between the holes should be 710 
mm.

-  Firmly fi x 1 dowel into each hole in the wall 

if necessary.

2.  Tighten the wall mount brackets on the wall 

with screws and screwdriver (not included). 
Make sure the they are securely installed.

3.  Loosen the screws at the back of the unit 

for 3 mm. Lift the unit onto the wall mount 
brackets and slot into place.

-  Before connecting the AC power cord, 

ensure you have completed all other 
connections.

-  Risk of product damage! Ensure that the 

power supply voltage corresponds to 
the voltage printed on the back or the 
underside of the unit.

•  Connect the mains cable to the AC~ Socket 

of the unit and then into a mains socket.