Telepathy Japan Inc. TPC007B Manuale Utente

Pagina di 2
 
 Flexible Fitting
The flexible fitting can be bent to any angle 
and is hung around the neck with the 
display unit and power unit suspended at 
chest level. The product can therefore be 
used promptly whenever required*.
* If the user regularly wants to view the display on the 
display unit, an attachment for securing the flexible fitting 
must be obtained separately. (For further details, please visit 
our home page.)
 Display Unit
This unit is equipped with a camera, 
microphone, speaker and headphone 
jack and has various built-in sensors.
 Power Unit
The power unit holds the built-in battery and also functions 
as the remote control. Users can operate the product using 
the operation buttons on the remote control.
•  Use only the USB cable and AC-USB charging adapter provided with the product.
•  Do not use the product while it is raining or in the bathtub, a shower stall or other location where 
it may be exposed to water or rain, and do not use in very humid locations. Also, do not place 
containers filled with water or chemicals near the product.
•  Do not place the product in very damp or dusty locations, on kitchen countertops, next to 
humidifiers, etc. or in other locations where the product may be exposed to oily vapors or steam.
•  Do not leave the product inside a vehicle with all of its windows closed, in locations exposed to 
direct sunlight, near the air outlets of an air conditioner or heater, or in a location where the 
temperature may become abnormally high.
•  Under no circumstances should the product be disassembled and/or remodeled.
•  Do not remove the eye protector when using the product with the naked eye since the edge of 
the display unit may injure the eye.
•  In the following situations, immediately turn off the product’s power, and disconnect the AC-USB 
charging adapter from the power outlet.
  − Smoke or strange odors are emanating or unusual noises are heard.
  − Water or foreign objects have found their way inside the product.
  − The product has been dropped or its casing has been damaged.
•  Do not go to sleep with the product around your neck since the flexible fitting may wind itself 
around your neck and cause suffocation.
PLEASE READ THIS FIRST
•  Do not use the product or AC-USB charging adapter while it is covered with a piece of cloth or 
fabric.
•  When cleaning the product, do not use a damp cloth or alcohol, benzine, paint thinner, or other 
solvents.
•  Start at a low volume level when using the product.
•  Under no circumstances should the product be worn while driving a vehicle, riding a bicycle, 
operating heavy or dangerous equipment, practicing sports or engaging in other dangerous 
activities or work.
•  Before using the product, check that there is no medical equipment nearby since medical 
equipment can be adversely affected by electromagnetic interference, possibly causing 
malfunction.
•  Do not touch the power plug of the AC-USB charging adapter with wet hands.
•  Do not connect the power plug of the AC-USB charging adapter if it is covered in dust or other 
foreign matter.
•  Do not put the product into a fire or apply heat to it. Do not place it near candles or other sources 
of fire.
•  If thunder is heard, do not touch the product or the plug of its AC-USB charging adapter.
•  Do not charge the product beyond the prescribed duration since this can cause electrolyte 
leakage, heat generation, rapture or ignition.
•  Do not wave or swing the product around.
•  After use, turn off the product’s power to ensure safety.
•  Do not touch the hot parts of the AC-USB charging adapter for prolonged periods of time.
•  Do not use the product in direct contact with the skin for prolonged periods of time.
•  Make sure you are wearing the product correctly.
•  Do not use the product for any purpose other than viewing or recording images.
•  If any trouble or malfunction has occurred in the product, stop using it immediately.
•  If you detect any skin irritation or abnormalities after wearing the product, stop using it 
immediately.
•  Prolonged use of the product may result in deterioration of your vision and/or other problems so 
take periodic breaks from use at moderate intervals.
•  If you feel fatigued, unwell or otherwise uncomfortable, stop using the product immediately.
•  While using the product, check that there are no easily breakable objects in the vicinity and 
otherwise ensure the safety of the area around you.
•  This product should not be used by persons with a history of photosensitivity, who are in poor 
health, or who have other physical conditions.
•  Do not allow children who are still growing to use the product since it may adversely affect their 
health.
•  When disposing of the product, follow the ordinances and rules established by the local 
governmental authority.
Safety Precautions
Trademark Notice
•  The names of companies and products or services found in this brochure are trademarks or 
registered trademarks of their respective companies.
For any inquires regarding failures or malfunctions of the product or repair 
requests, please contact our Customer Support by email.
Failure to observe the cautionary items set forth below may cause a fire and/or electric shock and possibly result 
in death, serious injury or other accident.
Warning
Caution
Failure to observe the cautionary items set 
forth below may cause accidents, injuries 
and/or damage to property in the vicinity.
How to power the product on 
and off
Slide your finger along the right side 
of the camera in the direction of the 
arrow, and hold your finger down until the 
power turns on. To turn off the power, slide your 
finger again and hold it down.
©2015 Telepathy Japan Inc. 
  Printed in Japan  M-001-00001-05
Telepathy Japan Inc.   Customer Support
Email: cs-jb@telepathywear.com
Detailed information concerning this product can be found on our 
home page. For information on specifications, etc. please visit our 
home page.
Wireless-related cautions and warnings
 Notices concerning wireless LAN
•  The wireless LAN functions of this product have been certified as being in compliance 
with the standards established in Japan and with the FCC standards of the United States.
•  Do not use the product in the vicinity of electrical products, audio-video products or 
office automation (OA) equipment or in any other places where magnetic fields or 
electromagnetic waves are generated.
•  Under the effects of magnetism or electrical noise, the product’s noise level may 
increase and/or communication may no longer be possible. (This is particularly the case 
when a microwave oven is in use.)
•  Using the product near a TV, radio or other such product may interfere with reception 
and/or disturb the image on the TV screen.
•  The device (this product) may not be discovered by your access point if there are 
multiple access points nearby using the same frequency channel.
 Precautions for 2.4 GHz band power-saving wireless 
communications and wireless LAN use
The frequencies which are specified for the product’s power-saving wireless 
communications and wireless LAN functions lie in the 2.4 GHz band.
This frequency band is also used by microwave ovens and other household appliances and 
by industrial, chemical and medical equipment, as well as by similar kinds of wireless 
stations, on-site radio stations for identifying mobile devices used at business sites, etc. 
and requiring permits, specially designated power-saving wireless stations not requiring 
permits, amateur wireless stations, etc.
1) Before using the product, check that there are no other wireless stations such as the 
ones mentioned above in the vicinity.
2) If radio wave interference occurs between the product and another wireless station, 
either promptly move to a different location to use the product or stop sending signals 
from the product.
 
Under no circumstances should the product be remodeled. Use of 
remodeled products constitutes an infringement of the Radio Act.
•  This product uses the frequencies from 2.402 GHz to 2.480 GHz in the 2.4 GHz band.
•  Details concerning certifications and conformity marks specific to the product can be 
checked by performing the following operation using the product.
 Setting 
 About Device 
 Legal Information 
 Verification
•  Power-saving wireless communication function: 2.4FH1
  − FH1 uses FH-SS as a modulation system, and the interference range is approximately 
10 meters or less.
  − All bands are used, and avoiding the bands of mobile device identification equipment 
is not possible.
•  Wireless LAN function: 2.4DS/OF4
  − The DS-SS and OFDM systems are used as modulation systems, and the interference 
range is approximately 40 meters or less.
  − All bands are used, and it is possible to avoid the bands of mobile device 
identification equipment.
•  This product has been certified by the FCC as specially designated radio equipment under 
the Radio Act and as proof of this, the FCC mark and FCC ID can be verified on the 
product. For information regarding this certification, check the electronic certification 
details for the product.
FCC Compliance Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance 
could void the user’s authority to operate the equipment.
FCC RF Exposure:
For body worn operation, this device has been tested and meets FCC RF exposure 
guidelines when used with an accessory that contains no metal and that positions the device 
a minimum of 0mm from the body. Use of other accessories may not ensure compliance with 
FCC RF exposure guidelines.
Users can also remove the remote 
control from the power unit, and 
operate it while holding it in their 
hands.
Release button
TPC007-B
TM
http://www.telepathywear.com
External light 
sensor
Camera
USB port (Micro-B)
The product is connected to a PC using 
the supplied USB cable for 
communication between the main unit 
and the PC and charging of the battery. 
By using the AC-USB charging adapter 
and USB cable, the user can also 
connect the main unit to a household 
power outlet for charging.
Operation Buttons
Users can operate the product 
using the operation buttons on 
both sides of the Display Unit.
Speaker
Headphone 
jack
LED indicator
This indicates the power on/off 
status and battery level.
Supplied Accessories
• AC-USB charging adapter
• USB cable
• “PLEASE READ THIS FIRST” (this brochure)
Note: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
Consult the dealer or an experienced radio/TV technician for help.
Eye Protector
When using the product with the naked eye, do not remove 
the eye protector because it protects the eye.
Even if the user is wearing eyeglasses, the product can still 
be used with the eye protector attached.