KOLON INDUSTRIES KG-100 Manuale Utente
Glimm User Guide #4
Android Phone
Android
phone mode
(If the yellow light flashes one more time, the module
has entered the iPhone mode. Turn off the module
and reset it to the Android mode.)
Press down on the power button of
the Glimm module for 2 seconds.
Release the button after
the aquamarine light flashes twice
and the green light flashes once.
The Android phone mode will be
selected and the module will turn on.
While the module is on, press down on the
power button for 3 or more seconds.
The remaining battery level will be shown
(in a green light ),
and a ruby light will flash twice
and the power will shut down.
Turn on and connect the Glimm Module
Turn off the Glimm module
Glimm User Guide #1
Android Phone
ANDROID PHONE
[APP ]
Bluetooth 4.0 or higher
(with BLE communication capability)
Android OS 4.4.x (KitKat) or higher
Please download the Glimm App
on your mobile phone
from the Google Play Store.
Go to Settings>
Wireless Networks>
and turn on the Bluetooth capability.
Glimm User Guide #2
Android Phone
From the list of available devices
below, tap “Couronne Glimm”
to complete the Bluetooth connection.
Select your mobile phone settings
Glimm User Guide #3
Android Phone
Go to Settings>My Device>Accessibility and tap
“Couronne Glimm.” Switch the toggle on the upper right to “On.”
Select your mobile phone settings
Glimm User Guide #5
Android Phone
Attach the Glimm module to your bag
The Glimm module attaches magnetically to the label hole
located on the rear of your bag.
Introducing Glimm
1. Glimm is a device that allows you to check notifications received on
your mobile phone, without having to take the phone out of your bag.
2. For Glimm to operate properly, you will need to charge it with the
micro USB cable and enable the Bluetooth capability on your phone.
3. Glimm works only with Android phones and iPhones that have
a phone signal.
ANDROID
PHONE
[APP ]
Bluetooth 4.0 or higher
(with BLE communication capability)
Android OS 4.4.x (KitKat) or higher
Bluetooth 4.0 or higher
(with BLE communication capability)
iOS software 8.0 or latest version
I PHONE
[APP ]
ANDROID
PHONE
I PHONE
Attaches/
detaches easily
with a magnet
Running the Glimm App
Glimm User Guide #6
Android Phone
Tap the Glimm icon
to activate the app.
As Glimm pairs with your mobile phone,
the color of the Glimm logo will change.
Tap the box on the right side of the Glimm app to turn on/off the
notification function.
ON
OFF
Glimm User Guide #8
Android Phone
*The alarm light may be displayed in an incorrect color (not the designated
color) due to a temporary error. The problem will be corrected once you turn
off the Glimm module and turn it on again.
Ruby>Aquamarine>Violet>LED turns off. This sequence will repeat 3 times,
and then the aquamarine light will flash twice repeatedly, a total of 15 times.
Finally, the aquamarine light will turn on one last time, and then the
LED will turn off. Until the connection is restored, the bottom of the
label and the Couronne logo will remain lit in red.
Depending on the setting of your phone, you will be alerted with a vibration
or the designated alarm sound.
If the Glimm app is activated, press the volume or power button of the phone
to stop the alarm sound.
To turn off the disconnection alarm, tap the icon located at the top
right of the Glimm app.
When the Bluetooth
connection is lost
Glimm module
Mobile phone
2sec
2sec
2sec
1sec
100sec
1sec
1sec
15times
3times
Theft / Loss Prevention
An aquamarine light slowly flashes
while the phone is ringing
A violet Light slowly flashes twice
When an
SNS
message
is
received
RING
RING
ANSWER
STOP
15sec
RING
UN ANSWERED CALL
When
a phone
call
is received
A ruby light slowly flashes twice
RING
When
a text
is received
The bottom of the label and
the Couronne logo will remain
lit in aquamarine for 15 seconds
Alerts are differentiated by color
Glimm User Guide #7
Android Phone
When you have
an unanswe-
red call
Android Phone / iPhone
Warranty
Your Glimm is warranted for a period of 1 year from the date of
purchase. (Please note that even during the free warranty service
period, the cost of repairs will not be covered by the warranty if the
malfunction caused by the user’s fault or by a natural disaster.)
Repairs not covered by the warranty
1. Malfunctions caused by the insertion of an alien substances into the product.
2. Repairs necessitated by dropping the product or other shocks that cause
damage or malfunction.
3. Damage or distortion of the exterior caused by chemical solvents such as
paint thinner or benzene.
4. Malfunctions caused by the use of non-original parts or expendables other
than the certified items provided by Kolon
5. Malfunctions caused by the mistaken application of a wrong operating voltage.
6. Loss or damage to parts or accessories caused by the improper disassembly
of the product.
7. Malfunctions caused by natural disasters.
8. Malfunctions caused by the user’s failure to comply with the “Handling Cautions”
explained in the user manual provided by Kolon
9. Any other product malfunctions caused by the fault of the user.
KOLON Customer Service Center:
1588-7667 (9AM–6 PM)
Android Phone / iPhone
Charging while the device is on
Charging while the device is off
Checking the battery life in the app
When you insert the micro USB charger cable, the remaining battery
life will be displayed once (in green) and the device will begin charging.
While charging: A soft green light will flash
repeatedly, indicating the current battery level.
When completely charged: The LED will turn off.
Tap the bar on the right. The remaining battery
level will be displayed as a percentage (%) and
a colored status bar.
Checking the remaining
battery level
While the Glimm module is on, briefly press the power button. The remaining
battery llife will be displayed in green as one of the following four levels.
0~25%
25~50%
50~75%
75~100%
Average battery life: 2 days
(The battery life may vary depending
on the usage conditions of the mobile phone)
Glimm User Guide #9
Android Phone
When the Glimm is on, press on
the module’s power button for
9 seconds.
A red light
will flash
twice to indicate that the Glimm
system is resetting and Glimm
will shut down.
Please be sure to reset the system if
more than 10 mobile phones have
been paird with Glimm, due to the
replacement of your mobile phone
devices or changing users.
On the Glimm module, locate the
small round hole on the left side of
the charger hole. Press this hole
with
a small pinhead or the tip of
a clip
to reset the Glimm module.
Please reset the module if the Glimm
module stops working or the buttons stop
operating properly.
Resetting the Glimm
Module
Resetting the Glimm
System
reset
Glimm User Guide #10
Android Phone