Arrow Electronics Inc. DB410C Manuale Utente
28/28
13 Special
care
when
using
USB
Since
the
APQ8016
has
a
single
USBOTG
channel,
care
needs
to
be
taken
when
the
USB
HOST
function
is
to
be
used.
Please verify that no cable is connected to the MicroUSB type B connector (and to a host on the other side of the cable) as
the hardware of the 410c board will inform software about the presence of a request to configure the USBOTG to device
mode. Depending on the software release that is used on the board, the driver may configure the USB Mux to Device
mode and none of the USB HOST ports will be connected to the SoC.
Please verify that no cable is connected to the MicroUSB type B connector (and to a host on the other side of the cable) as
the hardware of the 410c board will inform software about the presence of a request to configure the USBOTG to device
mode. Depending on the software release that is used on the board, the driver may configure the USB Mux to Device
mode and none of the USB HOST ports will be connected to the SoC.