Araknis Networks AN700APIAC Manuale Utente

Araknis Networks Wireless Access Point
Product Manual

Advanced Menu

14.7.1 - SNMPv2 Settings

This screen allows configuration of SNMPv2 Settings.

Figure 74. SNMP Settings

Path – Advanced, SNMP, SNMPv2

Parameters –

• Status – Select Enable to enable SNMPv2. Select Disable to disable SNMPv2.

Default: Enable

• Contact – Enter the name of the person managing the SNMPv2 server.

Default: Blank

• Location – Enter the physical location of the SNMPv2 server.

Default: Blank

• Port – Indicates the port number for SNMPv2 ‘listening’.

Default: 161 (This is a dedicated TCP/UDP port and typically should not be changed.)

• Community Name (Read Only) – Indicates the password for SNMPv2 read only access.

Default: Public. ‘Public’ is a typical default of SNMP v2 devices for Read Only.

• Community Name (Read Write) – Indicates the password for SNMPv2 read/write access.

Default: Private.

• Trap Destination – An SNMPv2 Trap is a notification of a network event such as a fault or security

event. The Trap Destination is typically the IP address of the SNMP server where trap messages
will be sent.

• Port – Indicates the SNMPv2 port number for ‘receiving traps’.

Default: 162 (This is a dedicated TCP/UDP port and typically should not be changed.)

• IP Address – IP address of the SNMPv2 server that will receive SNMP traps.
• Community Name – Indicates the password for the SNMPv2 trap community.

Configuration Instructions –

1. Click

Advanced, SNMP.

2. Specify the SNMPv2 settings.

3. Click

Save, then click Apply Changes to enable the new settings.