Zhuhai KEYCOOL Technology Co. LTD. KC71-A Manuale Utente
User manual
Function description:
1. The backlight RGB light, support the meteor shower, ripples, aurora, wave monkey, monkey
serpentine, key lights, 5 lights and other lighting effects.
2. Support USB firmware upgrade.
3. Support the multimedia keyboard key, keys, lock WIN, CAPS/CTRL swaps, and other functions.
4. The keyboard USB support automatic all key no rush to switch (no rush BIOS6 key, enter the
system key all no rush).
5. The buttons 1 ms speed response, unique processing algorithm solve the problem of aging
buttons double-click.
6. Cable dual-mode wireless, wireless bluetooth USES bluetooth 3.0, 3 bluetooth support
seamless switching equipment.
Keyboard instructions for a:
Bluetooth operation
1. The bluetooth indicator light flash, said the bluetooth pairing, 2.5 HZ.
2. The bluetooth indicator light flash, slow said bluetooth reconnection, 0.6 HZ.
3. Long press FN + Q/W/E for 3 seconds, bluetooth keyboard into the matching condition,
indicator light flash.
4. Short press FN + Q/W/E, bluetooth keyboard into reconnection, the indicator light flash slowly,
if the corresponding equipment unpaired, automatically enter the matching state.Such as the Q
key has been matched, W unpaired, this is a short press W, W the corresponding indicator light
into the flash, enter into the state of pairing.
5. When the bluetooth pairing need according to the prompt for the corresponding matching
code, this is to prevent wrong operation.
Composite key operation
6. FN + ESC FN = ` ~ FN + 1 = F1 + 2 = F2 FN + 3 = F3 FN + 4 = F4 FN + 5 = F5 FN + 6 = F6 FN + 7 = F7
FN + 8 = F8 FN + 9 = F9 FN + 0 = F10 FN + - = F11 FN++ = F12
7. FN + CTRL = CAPS/CTRL swaps
8. FN + win win = lock key
Lighting effects operation
9. FN + backspace key = normally on pattern, from the entertaining diversions, ripple patterns
such as return to full keyboard light mode.
10. FN + INS = lamp mode switches
11. Switch FN + DEL = light color
12. FN + page HM lighting recording switch, support two sets of custom (G1, G2) recording
13. FN + PU = start recording the G1, the first set of lights, such as recording, press again FN + PU,
flash, keyboard recording is complete.
14. FN + PD = start to record a second set of lights G1, such as recording, press again FN + PD,