Shen Zhen MTC Co. LTD WR7502 Manuale Utente
Tips
1. Default IP address and subnet mask are respectively 10.10.10.252 and 255.0.0.0
2. Be sure to make a note of any changes you apply to this page. If you change the LAN
IP address of the router, you have to open a new connection to the new IP address
and log in again. Also, you have to set the default gateway addresses of all LAN PCs
to this new IP address.
3. The router's LAN IP address and WAN IP address cannot be on the same IP segment.
If not, the router will not be able to access Internet.
4.3.2 WAN Setting
Plug Internet cable to WR7502 WAN port.
Set Steps:
①
Enter the web and Select
“Network Settings”.
②
Click the
“WAN Settings”.
Parameters Specification:
Connection Type: It displays the routers mode.
1、Configuration the Internet access
Support Static IP mode、Dynamic IP(DHCP)、PPPOE.