BOSHEL BATC-001 Manuale Utente
Rechargeable and waterproof
◎Controller
◎
Features
1.100 levels of vibration.
2.100 levels of static(optional).
3.The levels can be altered by use of up & down button.
4.A tone button activates a tone on the receiver collar.
5.The system can be used for 1 or 2 receivers collar.
POWER SAVING
6.The Receiver Collar will TURN OFF if is unused for 4 minutes.
7.Any movement will activate the Receiver Collar into STANDBY MODE.
8.The Controller will go into STANDBY MODE if there is no operation after 20 seconds
and turn off after 2 minutes.
◎How to match
1. 1.Charge the Controller
Connect the charger connector to the charging jack. After plug the charger into a
standard outlet， The red LED light inside the Transmitter will be lighted. Charge the
Controller at least 6 hours for the first charge. After fully charged ,the red LED light will be
turned off automatically.
2.100 levels of static(optional).
3.The levels can be altered by use of up & down button.
4.A tone button activates a tone on the receiver collar.
5.The system can be used for 1 or 2 receivers collar.
POWER SAVING
6.The Receiver Collar will TURN OFF if is unused for 4 minutes.
7.Any movement will activate the Receiver Collar into STANDBY MODE.
8.The Controller will go into STANDBY MODE if there is no operation after 20 seconds
and turn off after 2 minutes.
◎How to match
1. 1.Charge the Controller
Connect the charger connector to the charging jack. After plug the charger into a
standard outlet， The red LED light inside the Transmitter will be lighted. Charge the
Controller at least 6 hours for the first charge. After fully charged ,the red LED light will be
turned off automatically.