Kum Oh Electronics Co. Ltd. KSC100 Manuale Utente

b

g

a

c

Gear S3

Screw

(Silver)

g

c

Position of screws

to be removed

Gear S3

Array the Charging & security cable(      ) into the cable guide of the cradle

properly, insert it into the hole on the table in the direction to the rear side of

the cradle and attach it on the proper position firmly.

Insert the Charging & security cable(      ) into the hole on the smart table

while facing downward, and attach the cradle over the hole on the table. 

1.After removing the protective film from the double-sided adhesive tape, preserve the

   tape so that it doesn't get dirty.

   

If touching the tape with a hand or foreign materials get on it, its adhesive strength

   can be significantly deteriorated.

2.The adhesive tape will have full adhesive strength after the 24 hours from its placement.

   Please do not use the products right after its placement.

- Cautions when attaching the double-sided tape.

G022_EN1610_R02

▶Before installing, Please check up the parts.

Maintenance kit

m1

■ Maintenance kit

Use if the product needs to be reinstalled.

m2

▶Installation Guide - Gear S3 frontier/classic Normal Security Set

■ Assembling flow

c

d

e

f

g

a

a

a

a

a

b

Hole on the

smart table

Loosen the screw (silver) in the direction where the strap buckle side using the

screw driver included in the package.

※Make sure that  the screw in the direction where the buckle side be loose.
※Keep the screw (silver) separated from Gear S3 carefully.

Assemble the Security sensor(      ) along Gear S3 while paying attention to the assembling

direction. After assembling the Security sensor correctly, fix the Gear S3 and the Security

sensor firmly using the black screw(       ) for fixing the Security sensor included in the package.

※Before assembling the product, make sure to check the screw color(black). 

g

c

Hole on the 

normal table

a

a

Remove the protective film from all double-sided tapes on the bottom surface of

the cradle(      ).

b

b

Remove the

protective film