HMD global Oy TA-1046 Manuale Utente

1. Open the SIM and memory card tray by putting 

the provided tray opener into the hole next to the 

tray.
2. Put the nano-SIM into slot 1 located on the tray 

with the contact area face down. If you have a dual 

SIM variant, you can either put a second SIM or a 

memory card into slot 2. If you have a single SIM 

variant, you can only put a memory card into slot 2.
3. Slide the SIM and memory card tray back into 

place.
Use only original nano-SIM cards. Use of 

incompatible SIM cards may damage the card or the 

device, and may corrupt data stored on the card.

 

Note: On dual SIM capable devices, both SIM1 

and SIM2 slots support 4G networks. However, if 

your SIM1 and SIM2 are both LTE SIM cards, the 

primary SIM supports 4G/3G/2G networks, while 

the secondary SIM can only support 3G/2G. For 

more information on your SIM cards, contact your 

service provider.

Plug a compatible charger into a wall outlet, and 

connect the cable to your phone. Your phone 

supports the USB-C cable. You can also charge your 

phone from a computer with a USB cable, but it may 

take a longer time.

If the battery is completely discharged, it may take 

several minutes before the charging indicator is 

displayed.

To switch your phone on, press and hold the power 

key until the phone vibrates. The phone guides you 

through the setup.

For an online user guide and troubleshooting help, 

go to 

PKB2N55049A V1.0

TA-1055 / TA-1046

 

Main cameras 

Microphone

Loudspeaker

Charger connector

Audio connector

SIM card/

MicroSD card

Earpiece

Power/Lock key

Volume keys

Fingerprint 

sensor

Front camera

Proximity sensor

Microphone

Flash

USB-C

USB micro-B

xxxxxxxxxx