HMD global Oy TA-1081 Manuale Utente

1. Open the SIM card tray: push the tray opener pin 

in the tray hole and slide the tray out.
2. Put the nano-SIM in slot 1 on the tray with the 

contact area face down. If you have a second SIM, 

put it in slot 2.
3. Open the memory card tray: push the tray opener 

pin in the tray hole and slide the tray out.
4. Put the memory card in the memory card slot.
5. Slide the trays back in their slots.
Use only original nano-SIM cards. Use of incompati-

ble SIM cards may damage the card or the device, 

and may corrupt data stored on the card.

Use only compatible memory cards approved for 

use with this device. Incompatible cards may dam-

age the card and the device and corrupt data stored 

on the card.

 

Important: Do not remove the memory card 

when an app is using it. Doing so may damage the 

memory card and the device and corrupt data 

stored on the card.

Both SIM cards are available at the same time when 

the device is not being used, but while one SIM card 

is active, for example, making a call, the other may 

be unavailable.

 

Note: On dual SIM capable devices, both SIM1 

and SIM2 slots support 4G networks. However, if 

your SIM1 and SIM2 are both LTE SIM cards, the 

primary SIM supports 4G/3G/2G networks, while 

the secondary SIM can only support 3G/2G. For 

more information on your SIM cards, contact your 

service provider.

Plug a compatible charger into a wall outlet, and 

connect the cable to your phone. Your phone 

supports the USB micro-B cable. You can also 

charge your phone from a computer with a USB 

cable, but it may take a longer time.

If the battery is completely discharged, it may take 

several minutes before the charging indicator is 

displayed.

To switch your phone on, press and hold the power 

key until the phone vibrates. The phone guides you 

through the setup.

For an online user guide and troubleshooting help, 

go to 

TA-1081/TA-1088

EN-LATAM

Headset connector

Microphone

SIM cards

Memory card

Main camera

Flash

Fingerprint 

sensor

Microphone

Loudspeaker

Front camera

Proximity/Ambient 

light sensor

Earpiece

Volume keys

Power/Lock key

USB connector