Zhuhai Ltl Acorn Electronics Co. Ltd. LTL-5610WMG Manuale Utente

Pagina di 52
The camera is powered on and functioning well. The SD card has
enough space. 12AA batteries with enough power capacity. The
camera starting up by timing or by induction. Send MMS in Cam
mode or Cam+Video mode only, not in Video mode.
SIM card has been installed correctly. The MMS service has been
activated (some MMS services need pre-paid balance). The SIM
card is not password-protected.
When the camera is switched to the “OFF” position, it can be
installed with wireless modules battery box.
In the real environment, the signal must be strong enough (3 cells
or more). The recipient’s phone number must be correct. It is
highly recommended to do the send-and-receive test on site.
MMS parameters should be set correctly.
The Timer need to be OFF. If you have the Timer on, make sure
the time set is covered in the period you want to send MMS.
If you need to send MMS, make
sure MMS Status is not set OFF or SMS.
The setting
“0” indicates there is no limit to shoot picture daily. If the daily limit
has been reached, you can reset that number on your computer
or on the TFT display. Then the daily limit starts to count from “1”.
The camera should be stationary while sending MMS pictures.
3.8 View Local MPNO Name and Signal Strength on TFT
Display
Install the SIM card in the wireless module battery box, load 4 AA
batteries in camera main unit and 8AA batteries in the wireless module
battery box, install the wireless modules battery box to the camera
- 31 -