Zhuhai Ltl Acorn Electronics Co. Ltd. LTL-6511-4G Manuale Utente
46
indicates something is wrong. Specifically as:
• No SIM: No SIM card or installed incorrectly
• WAIT..: Searching signal or no signal received.
• ErCxGx: Error of network registry, please check if SIM card is
password-protected, deactivated due to low balance in the
account, or the signal is too poor.
account, or the signal is too poor.
• NO MDM: 4G module is not found or detected.
3.14 Features and Working Condition of 4G Wireless
Module
Ltl-6511-4G is able to take picture or video automatically and send to mobile,
E-mail or FTP when works with 4G wireless module, also you can send SMS
command to control the camera remotely and modify the camera parameters.
It with below features when camera works with 4G wireless module:
Through 4G network, send the original size of the photos and video
files shooted by the camera to the user's mailbox (less than 10MB, if
the video files are more than 10MB, the camera will automatically
segment the video file into less than 10MB file) or FTP.
files shooted by the camera to the user's mailbox (less than 10MB, if
the video files are more than 10MB, the camera will automatically
segment the video file into less than 10MB file) or FTP.
High speed of transmission: It costs less than 1 minute from triggering
to finishing sending 1.5M size photo to email, less than 2 minutes from
shooting 1080P video for 10s to finishing sending to email.
to finishing sending 1.5M size photo to email, less than 2 minutes from
shooting 1080P video for 10s to finishing sending to email.
Save 4G traffic: support to send thumbnail to mobile, E-mail or FTP by
MMS.
MMS.
4G send options: 1. Send immediately after shooting. 2. Send all
unsent picture at the specified time intensively, the 4G module is
working at the sending time only to reduce power consumption
greatly.
unsent picture at the specified time intensively, the 4G module is
working at the sending time only to reduce power consumption
greatly.
Supports to send SMS commands to 4G module to modify the camera
parameters and trigger remotely.
parameters and trigger remotely.
Send SMS command to module to get original picture sent to E-mail
refer to the thumbnail received on mobile.
refer to the thumbnail received on mobile.
SMS remote control function is realized by timing wakeup to the 4G
module, SMS wakeup interval could be set as 10 minutes or 1 ~ 24
hours, the shorter of the interval, the faster of command responding,
but more power would be consumed.
module, SMS wakeup interval could be set as 10 minutes or 1 ~ 24
hours, the shorter of the interval, the faster of command responding,
but more power would be consumed.
Supports to power off the module by camera setting when the 4G
function is not in using, it won’t consume any additional power and
would work as the basic camera without 4G function.
function is not in using, it won’t consume any additional power and
would work as the basic camera without 4G function.