Titan Company Limited 90064 Manuale Utente
Sometimes during reconnection the Notification connection might not take place. This is indicated with
notification missing icon.
notification missing icon.
If the Bluetooth is disconnected or notification is disconnected when phone is in range, please use the
below steps to recover connection. This connection issue can happen when the Bluetooth connection
gets corrupted either on the phone or on the band.
below steps to recover connection. This connection issue can happen when the Bluetooth connection
gets corrupted either on the phone or on the band.
-
Touch the band to wake it up and bring the phone app to front on the phone. The phone app
should try to reconnect to band.
should try to reconnect to band.
-
If connection is not restored
o Quit the app (select drop down menu on android app and select quit. In iphone slide out
the app)
o Switch off Bluetooth on the phone and switch it back on
o Restart the app
o Restart the app
-
If connection still fails
o Go to Advanced setting screen on the band and select Restart Bluetooth (see section
2.7.3)
o Restart the app on the phone
-
If all the above attempts fail, do a factory reset and do new pairing (see section 2.7.3)
8. App Usage
This section covers the app usage for Android and iPhone connected app for the band. While the app
usage is very similar between both platforms, there are minor differences. This document describes the
Android usage while highlighting the differences in iPhone.
usage is very similar between both platforms, there are minor differences. This document describes the
Android usage while highlighting the differences in iPhone.
8.1 Initial Connection
The app starts with the connection screen and looks for Bluetooth devices with names FT-Ges-XXXX.
During first time use, when no device is paired, it will list all the nearby devices with matching FT-GES
names. User has to make sure his band is in connectable state (new band or band that is factory reset).
He can select his band from the list to pair and connect.
During first time use, when no device is paired, it will list all the nearby devices with matching FT-GES
names. User has to make sure his band is in connectable state (new band or band that is factory reset).
He can select his band from the list to pair and connect.
When app is run after this initial connection, it will connect directly to previously paired band unless
there are more than one paired bands. If more than one paired bands are found, user is given option to
select the band to connect to.
there are more than one paired bands. If more than one paired bands are found, user is given option to
select the band to connect to.
After initial connection the app will take the user to accessibility screen. User has to enable notification
access to this app and press back button to return to the app. In android, the app will display “Pairing
complete. Press ok to restart”. The app will restart and connect to the band.
access to this app and press back button to return to the app. In android, the app will display “Pairing
complete. Press ok to restart”. The app will restart and connect to the band.