Ningbo EverFlourish Smart Technology Corp. Ltd EF200T Manuale Utente
Instruction Manual for
RF Remote Control Socket and Transmitter
EMW200R-UL，
，
，
，EMW200RA-UL, the remote control socket
EMW200T-1，
，
，
，EMW200TA-1, the hand held transmitter
As always follow electrical safety precautions, do not use with unattended appliances or those involving
heating elements.
Function
1.
The remote control socket (EMW200R-UL，EMW200RA-UL) turns on and off the connected lighting or
appliance by a wireless transmitter (EMW200T-1，EMW200TA-1) using radio frequency up to 80ft away.
appliance by a wireless transmitter (EMW200T-1，EMW200TA-1) using radio frequency up to 80ft away.
2.
It is ideal for controlling lighting for the purposes of home automation and energy saving.
3.
Each transmitter controls up to 3 channels. Each channel can command up to 3 receivers.
Operation
1.
Check the group setting at the back of the transmitter, A, B, C or D. If the transmitter is in group A, then, the
commanded receiver has to be in the same group setting.
commanded receiver has to be in the same group setting.
2.
Check the group setting at the back of the receiver is same as transmitter and the channel no, eg. A1, A2 or A3
3.
Connect the remote control socket to the mains power supply.
4.
Press the corresponding “ON”, “OFF” buttons on the transmitter to switch on and off the connected appliance by
remote control. (eg. on/off buttons 1 controls receiver A1, 2 controls receiver A2, 3 controls A3)
remote control. (eg. on/off buttons 1 controls receiver A1, 2 controls receiver A2, 3 controls A3)
5.
The indicator on the receiver blink once for every reception of power on/off
Caution
1.
For safety reason, always switch off your appliance before connection.
2.
Appliances to be connected to the remote control socket MUST NOT exceed the voltage and frequency ratings
as in “Specifications”.
as in “Specifications”.
3.
User can adjust the channel group on the transmitter and socket receiver at any time. And to change the group
setting, eg. From A1 to A2, or to A3, in order to change the control button position on the transmitter.
setting, eg. From A1 to A2, or to A3, in order to change the control button position on the transmitter.
4.
To adjust the channel or the groups, always use a big screw driver with the same diameter as the adjustment
arrow at the back of the socket and receiver. A small screw driver will deform the plastic housing during
adjustment.
arrow at the back of the socket and receiver. A small screw driver will deform the plastic housing during
adjustment.
Specifications
EMW200R-UL，
，
，
，EMW200RA-UL
1.
Power Rating : 125V~, 8A, resistive, 625W tungsten
2.
Frequency: : 433.92 MHz,
3.
Distance:
: 80ft max. (open area)
EMW200T，
，
，
，EMW200TA
1.
Battery
: 23A 3L R50 12V
2.
Frequency
: 433.92 MHz
3.
Distance
: 80ft max. (open area)