Philips Wireless HD Net Connect SWW1890 SWW1890/27 Manuale Utente

Codici prodotto

SWW1890/27

9 Frequently asked questions

The power LED on the

receiver is not lit up in

red in standby mode.

Make sure that there is power supply for the receiver.

The laptop screen

image is not

full screen on my TV.

Right-click on an open space on your desktop.

Select Graphics Options > Output to > Digital Television (Now the

laptop image will only appear on your TV).

Once again, right-click on an open space on your desktop.

Select Screen Resolution.

On the pop-up box increase the resolution settings till the laptop

image better fits your TV screen.

Select OK and KEEP CHANGES when you are satisfied with your

image size.

There is no video

displayed on my TV

screen.

• Make sure that the appropriate cables are selected and inserted to the

transmitter, receiver, and HDTV.

• Make sure that you select HDMI as the input source on your HDTV.

• Check the power LED and status LED on the receiver:

• Flashing blue power LED: Make sure that the transmission range

between receiver and transmitter is not over 23 feet (7 meters)

transmission distance. Move the transmitter closer to the receiver.

• Solid blue power LED + slow and flashing source LED: 1)

Make sure that the frame rate and video resolution of your

A/V equipment are supported and conformed to the technical

specification (see the chapter ‘Technical data’). 2) Connect

the computer to your TV with an HDMI cable to check the

compatibility of the video format.

• Solid blue power LED + quick and flashing source LED: 1) Make

sure that the proper cables are connected between the receiver

and HDTV. 2) Make sure that your computer connected to the

transmitter is powered on. 3) Make sure that the HDMI cable is

connected between the HDTV and receiver. 4) Make sure that the

display setting of your computer is set to clone display or extended

display.

Tip

•

For information about how to set your computer to clone or extended display, see

‘How can I connect to my computer to enable the external display?’ described later in

this chapter.

English