Channel Vision C-0310 Dépliant
Specifications:
Channel Vision’s 10dB power injected amplifier increases the strength of the incoming cable or antenna signal
for longer runs to more outputs. Unlike most RF amplifiers, the C-0310 uses an external power supply that can
be connected directly to the unit using a coax “F” connector. For added versatility, an optional power injector
may be used to feed power back to the amplifier from a remote location, thereby eliminating the need to install
the C-0310 near a power outlet.
for longer runs to more outputs. Unlike most RF amplifiers, the C-0310 uses an external power supply that can
be connected directly to the unit using a coax “F” connector. For added versatility, an optional power injector
may be used to feed power back to the amplifier from a remote location, thereby eliminating the need to install
the C-0310 near a power outlet.
© 2004, C
HANNEL
V
ISION
™
Bandwidth 45-1000Mhz
Gain 10dB +/-1.5
Flatness +/-1dB
Return Loss (min) 14dB
C-0310 10dB Amplifier
S t r u c t u r e d W i r i n g S o l u t i o n s
Rev 5/04
234 F
ISCHER
A
VENUE
• C
OSTA
M
ESA
, CA 92626
(714) 424-6500 • (800) 840-0288 • (714) 424-6510 fax
www.channelvision.com • email: sales@channelvision.com
spec sheet #
CVC-0402
Dimensions: 6-3/8” (l) x 2-1/2” (h) x 1-3/4” (d)
Features:
1 in 1 out 10dB Amplifier
For remote power , use model# CVT-PI
Bi-directional power injected down the coax
5-42MHz return path for interactive TV
54-1000MHz forward path
UL and CSA approved
Output Power +10dB
Dist. X-Mod. -70dB
CTB -65dB
Power Supply 12V/55mA