Labtec spin™ 75 2222455 Dépliant

Thank you for purchasing Labtec

®

Spin

™

75 computer

speakers. Your Labtec speakers are quick to install, easy to
use and produce great sound.

You can connect your speakers to your computer
soundcard, or to an external audio source, such as a CD
player, cassette tape deck, or radio. Connect your speakers
as shown below: Note: If your soundcard has both a line
level output and a speaker output, use the line level output.

• Open your soundcard’s mixer program. In Windows

you’ll find this program by double-clicking the small
speaker icon in the lower right corner of the screen.

• Set your Labtec speaker volume control to its center

position.

• With a music CD playing, adjust the mixer’s main

volume to 2/3 or greater and center balance. Close or
minimize the mixer program.

• Now use the speaker volume control to adjust the

volume for your system.

You can plug most types of headphones into the headphone
jack on the front of the main speaker. When you plug in
headphones, the speakers stop producing sound. To adjust
the volume for your headphones, use the controls on the
front of the main speaker.

For problems with your computer, consult the user’s guide
that came with it.

Speakers produce weak or no sound.

• Is the power light on? Make sure the speakers are

connected to the power adapter and the power button is
on.

• Is there output from the soundcard? Try connecting the

speakers to an alternative audio source - for example, a
CD player, cassette tape deck, or radio. If there’s sound
from the speakers, the problem is probably with your
soundcard. If no other sound source is available, try
removing the plug from the soundcard and turning the
speaker to maximum volume. You should hear a hum or
buzz when you touch the tip of the plug. If you do, the
speaker is ok, and you should check your soundcard
setup.

•   Are headphones plugged into the speaker? Sound is

blocked whenever the headphones are plugged in. Try
removing them to restore sound to the speakers.

One speaker doesn’t produce sound.

•   Is the soundcard connection secure? Make sure the cable

from the soundcard to the main speaker is properly
secured.

•  Is the balance control centered?

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Unplug the speakers from the computer and from the

electrical outlet before cleaning them with a dry cloth.

• Install in accordance with the manufacturer’s instructions.
• Place the speakers in a stable location so they will not fall

causing damage to the speakers or bodily harm.

• Do not use the speakers near water, and do not immerse

them in any liquid or pour any liquid on them.

• Do not block the openings in the speaker cabinets, never

push objects into speaker vents or slots because of fire or
electric shock hazards, and provide sufficient space
around the speakers for proper ventilation.

• Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized plug. A

polarized plug has two blades with one wider than the
other. The wide blade is provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

• Operate the speakers only from the low level audio line

out jack of the computer or of an audio device.

• Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

• Only use attachments/accessories specified by the

manufacturer.

• For added protection during lightning storms, unplug the

speakers from the electrical outlet and turn off the
computer.

• Unplug this apparatus when unused for long periods of

time.

• Servicing is required when the apparatus has been

damaged in any way, such as when the power-supply
cord or plug has been damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.

• Refer all servicing to qualified service personnel.
• The speakers should be disconnected from the mains by

unplugging the power cord of the speakers from the AC
mains receptacle.