HID Identity FlexSmart MIFARE 6055BBL0010 Manuale Utente

 
The Model 6055B HID MIFARE Reader is a multi-purpose contactless card 
reader/writer, with both Wiegand and RS232 ports, as well as external control 
lines for LED and Beeper control.    
 
Compatible Cards 
 
The 6055B is designed for use with the following MIFARE contactless smart 
cards:  

HID Model 1430 with Philips S50 Standard card IC.   
HID Model 1431 with 125 kHz proximity and Philips S50 Standard card IC.   
Cards using Philips S50 or compatible Infineon Card IC 

 

Card using Philips Mifare Pro IC, emulating the S50 in contactless mode 
Card using Philips Mifare Lite (reads Card Serial Number only) 

 
These cards operate at 13.56 MHz and meet the ISO 14443-A standard for 
contactless smart cards.   
 
Operational Modes 
 
The 6055B HID MIFARE Reader has two operational modes: 
 

Security Mode - Wiegand reader function.  The reader defaults to this 
mode, intended for use with an access control panel.  The reader will 
output OEM card data or the Mifare 32-bit Card Serial Number in Wiegand 
format.  This data is also transmitted in Hexadecimal format on the RS232 
port.   
 
Transaction Mode – Non-access control function.  The reader responds 
to external commands received at the RS-232 port, typically connected to 
a host PC or micro-controller.  The software developer or system 
integrator must incorporate HID’s communications protocol into the host 
software or firmware to communicate with the reader. 
 

 
USING THE 6055 IN SECURITY MODE 
 
In security mode, the 6055B typically transmits OEM card data in Wiegand 
format data exactly as it is encoded onto the card.  The only exception to this is 
when the reader is configured to transmit the 32-bit Card Serial Number (CSN), 
in which case there are several configurable options for data output formats.