Dual XDMA5280 Manuale Utente
3
XDMA5280
INSTALLATION
Wiring Diagram
Rear Preamp Output
Connect to amplifier RCA input
Antenna Connector
RCA Cable
(sold separately)
AMP
BLUE
BLACK
RED
YELLOW
Remote Turn-On
Connect to amplifier or power
antenna. Insulate wire if not used.
antenna. Insulate wire if not used.
Ground
Connect to vehicle
chassis ground.
chassis ground.
Accessory
Connect to ignition
circuit or switched 12 volt source.
circuit or switched 12 volt source.
Memory
Connect to battery
circuit or constant 12 volt source.
circuit or constant 12 volt source.
Right Front
Gray/Black (-)
Gray (+)
Gray (+)
Left Front
White/Black (-)
White (+)
White (+)
Right Rear
Violet/Black (-)
Violet (+)
Violet (+)
Left Rear
Green/Black (-)
Green (+)
Green (+)
10 AMP
AGC Fuse
FUSE
When replacing the
fuse, make sure new
fuse is the correct type
and amperage. Using
an incorrect fuse could
damage the radio.
The XDMA5280 uses
one 10 amp ATM fuse
located beside the wiring
connector.