LevelOne PLI-3411 Manuale Utente

2

H/W Version: 1

The LevelOne PLI-3411 200Mbps Powerline Wireless 

Access Point can be used to bridge Ethernet devices 

such as modems, routers, PCs, set-top-boxes, and 

game consoles, allowing users to share network 

access via existing in-home power cabling. What's 

unique is that the device has an extra built-in 802.11n 

Access Point, enabling users to enjoy mobility, high-

speed wireless connection and better coverage with 

no more dead zones. Just plug the PLI-3411 into any 

wall power socket, and you can easily set up a secure 

wireless network by pressing the Wi-Fi Protected 

Setup (WPS) button. Thus, the adapter can extend 

your wireless coverage through power lines for 

multimedia applications such as online games, IPTV 

and audio streaming from room to room.

The PLI-3411 does not require the time and money 

needed to install expensive Ethernet cables 

throughout your house in order to share your home 

network. Just one touch of the “Sync” button to 

install the bridge utility and your high-speed network 

is ready. It’s as easy as simply plugging in your 

networking devices and using the electrical wiring in 

your home.

With an integrated 802.11n Wireless Access Point, the 

adapter can bridge wireless connections of up to 6 

times the speed and 3 times the wireless coverage of 

an 802.11b/g network device. It supports a data rates 

up to 300Mbps and is also compatible with 802.11b/g 

equipment. The Wireless Protected Access (WPA-PSK 

/ WPA2-PSK) and Wireless Encryption Protocol (WEP) 

features enhance the level of transmission security 

and access control over Wireless LAN. 

-  Extends your home network through existing 

electrical wiring with transfer speeds of up to 

200Mbps

-  Share your wireless network up to 300Mbps 

-  Built-in 3-Port Fast Ethernet switch

-  Auto Channel Selection for low interference band 

-  Simple Plug and Play installation

-  Security push button for software free configuration 

-  Simple wireless security with WPS push button 

-  Wireless security with WPA/WPA2-PSK and 

  64/128-bit WEP encryption

200Mbps Powerline Adapter

1. LED Indicators

2. WPS Button

3. Wireless Button

4. RJ-45 Ethernet Port

Wireless 1.3-Megapixel Network 

Camera

1

PLI-3411

5. Reset Button

6. Security Button

7. Power Plug

2 3

4

5 6

7