ECS A780GM-A Ultra V1.0 A780GM-A ULTRA V1.0 Manuale Utente
Codici prodotto
A780GM-A ULTRA V1.0
11
Installing the Motherboard
1
Install your CPU. Pull up the lever away from
the socket and lift up to 90-degree angle.
2
Locate the CPU cut edge (the corner with
the pin hold noticeably missing). Align and
insert the CPU correctly.
insert the CPU correctly.
3
Press the lever down and apply thermal
grease on top of the CPU.
4
Put the CPU Fan down on the retention mod-
ule and snap the four retention legs of the
cooling fan into place.
cooling fan into place.
5
Flip the levers over to lock the heat sink in
place and connect the CPU cooling Fan power
cable to the CPUFAN connector. This com-
pletes the installation.
cable to the CPUFAN connector. This com-
pletes the installation.
CPU Installation Procedure
The following illustration shows CPU installation components.
To achieve better airflow rates and heat dissipation, we suggest that you
use a high quality fan with 4800 rpm at least. CPU fan and heatsink
installation procedures may vary with the type of CPU fan/heatsink sup-
plied. The form and size of fan/heatsink may also vary.
use a high quality fan with 4800 rpm at least. CPU fan and heatsink
installation procedures may vary with the type of CPU fan/heatsink sup-
plied. The form and size of fan/heatsink may also vary.
Installing Memory Modules
This motherboard accommodates four memory modules. It can support four 240-pin
DDR2 1066 (AM2+)/800/667. The total memory capacity is 32 GB
DDR2 1066 (AM2+)/800/667. The total memory capacity is 32 GB
*
.
DDR2 SDRAM memory module table
Do not remove any memory module from its antistatic packaging until you
are ready to install it on the motherboard. Handle the modules only by
their edges. Do not touch the components or metal parts. Always wear a
grounding strap when you handle the modules.
are ready to install it on the motherboard. Handle the modules only by
their edges. Do not touch the components or metal parts. Always wear a
grounding strap when you handle the modules.
You must install at least one module in any of the four slots. Each module can be
installed with 8 GB of memory.
installed with 8 GB of memory.
Memory module
Memory Bus
DDR2
800
400 MHz
DDR2
1066
533 MHz
DDR2
667
333 MHz
The four DDR2 memory sockets (DDR2_1, DDR2_2, DDR2_3, DDR2_4) are di-
vided into two channels and each channel has two memory sockets as following:
vided into two channels and each channel has two memory sockets as following:
Channel 0: DDR2_1, DDR2_2
Channel 1: DDR2_3, DDR2_4
f
f
ff