Omnitron iConverter 10/100M 8903-2-D-W Manuale Utente
Codici prodotto
8903-2-D-W
Fiber Port Options
10/100M models with fixed-fiber connectors are available with
multimode (MM) dual fiber, single-mode (SM) dual fiber and
single-mode single-fiber (SF) options. They support ST, SC,
LC and MT-RJ connectors with distances up to 5km over MM
fiber, 120km over SM fiber and 40km over SF. The 10/100M
Small Form Pluggable (SFP) model supports a wide variety of
SFP transceivers available in 20nm increments from 1270nm
to 1610nm to support FTTX and CWDM applications.
Link Modes
Link Modes
The 10/100M features multiple, user-selectable link fault
detection modes, including Link Fault Propagation, Remote
Fault Detection and Symmetrical Fault Detection. These Link
Modes provide rapid fault detection and isolation by monitoring
the state of the cabling hardware, and operate independently
of the network management.
Tag VLAN, Port VLAN and QoS
Tag VLAN, Port VLAN and QoS
The
iConverter 10/100M supports the IEEE 802.1Q tag Virtual
Local Area Network (VLAN) packet tagging and untagging
(including Q-in-Q) and the 802.1p Quality of Service priority
standards.
10/100M VLAN Q-in-Q tunneling technology enables service
10/100M VLAN Q-in-Q tunneling technology enables service
providers to offer their customers E-Line and E-LAN services
via Ethernet Virtual Circuit (EVC), which connect multiple
business LANs at different locations and make their networks
appear to be on the same local network. Q-in-Q Service tags
transparently transport customer network traffic across the
service provider network, isolating it from other customer and
service provider management traffic.
10/100M Port VLAN enables the ability to specify and restrict
10/100M Port VLAN enables the ability to specify and restrict
traffic flow between the fiber, UTP, backplane and management
ports.
The 802.1p prioritization standard enables delivery of Quality
The 802.1p prioritization standard enables delivery of Quality
of Service (QoS) to high-priority, real-time applications such
as voice and video over Ethernet.
Port Bandwidth Control and Port Access Control
The Bandwidth Control feature supports levels of bandwidth
Port Bandwidth Control and Port Access Control
The Bandwidth Control feature supports levels of bandwidth
between the fiber and UTP ports from 128Kbps to Full Line
Speed.
The 10/100M features Port Access Control which blocks user
The 10/100M features Port Access Control which blocks user
service while maintaining the network link. Port Access Control
enables the service provider to control user access while
maintaining port configuration for easy disabling or enabling
of customer service. Port Access Control provides enterprise
administrators the capability to improve network security by
controlling port access when the port is not in use.
Port Statistics and Optical Performance Statistics
The 10/100M supports reporting of utilization, port and optical
performance statistics. Port statistics are available for 38
different variables for the UTP and fiber ports. Additionally,
full optical performance statistics are available on SFP fiber
transceivers with a digital diagnostic bus.
Port and optical performance statistics reporting provides
Port and optical performance statistics reporting provides
the ability to monitor customer bandwidth utilization, network
performance and the link signal quality for each individual
port.
IEEE 802.3ah Operations, Administration and Maintenance
The 10/100M supports the IEEE 802.3ah OAM standard,
including Fault Detection, Performance Monitoring and Remote
Loopback.
Fault Detection
Fault Detection
The 10/100M detects and indicates link failures, dying gasp
and other critical events.
Performance Monitoring
Performance Monitoring
802.3ah Performance Monitoring tools are used for the detection
and notification of link performance (quality) faults. Ethernet
data performance can deteriorate slowly before disrupting
service, and the 10/100M allows the setting of error-per-second
thresholds. Once the pre-set error threshold is exceeded, an
event notification is generated that provides early indication of
a problem that may be resolved prior to loss of service.
Remote Loopback
Remote Loopback
Remote Loopback is used for fault localization and link
performance testing. When a 10/100M port is in loopback
mode, all received service traffic is looped back and transmitted
back unaltered. The statistics from the 10/100M port and the
remote link partner can be compared for consistency.
remote link partner can be compared for consistency.
advanCed Features
Page 2
metrO ethernet aCCess
At the Central Office, the 10/100M plug-in module is installed
in a managed iConverter 19-Module chassis for high-density
fiber distribution from UTP switch equipment. At Customer
Premises 1, the 10/100M plug-in module is installed in a
2-Module chassis with an
iConverter
4TxVT four-port switch
module. The two modules share data via the Ethernet
Backplane. This configuration functions as a remotely
managed demarcation switch with a fiber uplink port to the
Central Office and five copper ports that drop off Ethernet
service. At Customer Premises 2, the 10/100M standalone
NID provides a fiber uplink to a single copper port for intelligent
demarcation of Ethernet services.
iConverter
10/100M