IMC Networks IE-MiniFiberLinX-II 856-19784 Manuale Utente

•

Preserves complete end-to-end fiber

connection integrity

•

Bi-directional bandwidth control

(per port, per direction, per VLAN)

•

Read/write IEEE 802.1Q VLAN-tags

•

Extra Tagging with Q-in-Q mode (802.1p)

•

Supports passive 802.3ah OAM

(Operation, Administration &

Management)

•

QoS: IEEE 802.1p-based packet

prioritization (2 queues [high/low] with

8 levels of priority)

•

VLAN filtering up to 32 values

•

Layer 2 packet switching, store and

forward operation

•

Forwarding rate: 14,881 pps for 10 Mbps;

148,810 pps for 100 Mbps

•

AutoCross for MDI/MDIX

•

Features Auto Negotiation and

Selective Advertising

•

Supports Half and Full-Duplex operation

•

MTU: Supports over-sized packets up to

1916 bytes per packet

•

Password Control

•

Multiple Access Levels: User Assigned

Accounts & Access Levels

•

SNMP V1 and V2c compatible

•

Includes GUI-based iView² software for

remote management and upgrades

•

Monitors far-end (remote) status without a

physical presence or separate connection

•

IEEE 802.3x Flow Control

•

Includes DHCP and TFTP clients

•

Supports Telnet

•

Includes loopback test modes

(MAC swap)

•

Includes LinkLoss and FiberAlert

•

Remote capabilities with built-in support

for UMA (IP-less management)

•

RS-232 (Craft) interface for local

management

•

Serial cable for direct connection to a

PC’s Serial Port

•

IEEE 802.3i 10Base-T twisted pair

•

IEEE 802.3u 100Base-TX twisted pair

•

IEEE 802.3u 100Base-FX or SX fiber

•

50/125µm or 62.5/125µm multi-mode fiber

•

9/125µm single-mode fiber

•

Single-strand fiber or CWDM

Connectors: RJ-45, and ST or SC

Dimensions:  0.83”H x 1.80”W x 3.35”D

(2.11 x 4.57 x 8.51 cm)

Humidity:
5% - 95% (non-condensing)
Operating Temperature:
-49° to +185° F (-45° to +85° C) DC Telco

-13° to +167° F (-25° to +75° C) DC Adapter

+14° to +122° F (-10° to +50° C) AC Adapter
Storage Temperature:
-49° to +185° F (-45° to +85° C)

AC Wall Adapter:

100 to 240 VAC ±10% input,

5 VDC output, 2A max.

DC Input Voltage:

12 to 48 VDC *, 1 to .02A,

7 to 50 VDC, 1 to 0.1A

IEEE 802.3af Power over Ethernet
* Telco compatible 48 VDC allows for an 

Due to the small size and extended temperature functionality of the IE-MiniFiberLinX-II, its versatility allows it to be

installed in tight spaces without the need to be temperature controlled. In this application, the IE-MiniFiberLinX-II with

Telco Power and Last Gasp is installed in a light pole, converting fiber to copper for an IP camera. In the event of a loss

of connectivity, the Last Gasp TRAP feature notifies the Network Engineer as to whether or not the power has failed or

if a data cable has been broken without having to send a technician to the site.