Omnitron OmniConverter FPoE+/S 9321-1-19W Manuale Utente
Codici prodotto
9321-1-19W
OmniConverter
OmniConverter
TM
Power over Ethernet injector/source
■
10/100 UTP to fiber media converter
■
Supports IEEE 802.3af PoE and IEEE 802.3at PoE+
■
standards on one or two UTP copper ports
Multiple port configurations:
■
2 Port Device: 1 Fiber + 1 UTP
•
3 Port Device: 2 Fiber + 1 UTP
•
3 Port Device: 1 Fiber + 2 UTP
•
4 Port Device: 2 Fiber + 2 UTP
•
Supports 100BASE-FX fixed-fiber and 100BASE-FX
■
SFP transceivers
Redundant protected fiber link option (using dual SFP
■
transceivers)
Compatible with legacy pre-IEEE standard powered
■
devices
Configurable PoE power reset
■
Available in AC and DC models
■
Commercial (0 to 50ºC), wide (-40 to 60ºC) and
■
extended
1
(-40 to 75ºC) operating temperature ranges
Lifetime Warranty and free 24/7 Technical Support
■
OmniConverter
FPoE/SL, FPoE/S and FPoE+/S
10/100 Media Converter with Power over Ethernet (PoE/PoE+)
The OmniConverter FPoE/SL, FPoE/S and FPoE+/S are
multi-port media converters that convert 10/100BASE-T UTP
to 100BASE-FX fiber and support Power-over-Ethernet (PoE
and PoE+). Classified as Power Sourcing Equipment (PSE),
they can provide power to one or two Powered Devices (PDs)
using standard UTP cables that carry the Ethernet data. The
OmniConverter functions as a PoE mini-switch, and supports
a variety of port configurations, including single or dual UTP
and SFP ports.
The OmniConverter media converters can power PDs such as
The OmniConverter media converters can power PDs such as
VoIP phones, wireless access points, network cameras, building
access and automation equipment. They are especially useful
at powering PDs in hard-to-reach locations with limited access
to AC power outlets (ceilings, closets, etc.). The cost of bringing
electrical power to each device is eliminated by powering the
equipment through the UTP cable.
OmniConverter media converters are available in two power
OmniConverter media converters are available in two power
levels. FPoE/SL and FPoE/S models support PoE (IEEE
802.3af) and provide up to 15.4W of power per UTP port.
FPoE+/S models support PoE+ (IEEE 802.3at) and provide
up to 25.5W per port for more demanding PDs such as video
conferencing equipment, PTZ (pan-tilt-zoom) cameras and
802.11n wireless access points.
Models with two fiber ports support redundant fiber uplinks
Models with two fiber ports support redundant fiber uplinks
for critical applications that require protection and sub 50ms
restoration in the event of a fiber failure. The second fiber port
may also be used for daisy-chaining multiple media converters,
or it may be used as another switch port.
Configurable features include link modes which can propagate
Configurable features include link modes which can propagate
link faults from fiber to copper and copper to fiber, and a PoE
power reset function, in which a loss of fiber Rx link can disable
the PSE power output for 2 seconds to allow the remote PD
to re-initialize.
OmniConverter media converters support fixed-fiber connectors
OmniConverter media converters support fixed-fiber connectors
and Small Form Pluggable (SFP) transceivers, enabling easy
adaptability to different fiber types, distances and wavelengths.
The products support multimode, single-mode, single-mode
single-fiber, in standard and CWDM wavelengths.
The compact standalone OmniConverter media converters can
The compact standalone OmniConverter media converters can
be tabletop mounted, wall mounted, or DIN-rail mounted using
an optional DIN-rail mounting kit. They can also be mounted
on a 1U 19” rack-mount shelf. The products are DC powered
and available with an optional external 100 - 240VAC universal
power adapter.
Key Features
SFPs not included