Zalman Fatal1ty FS-V7 FS-V7 FATALITY Manuale Utente

1.1) Please read this manual thoroughly before installation.

1.2) After installing this product on a VGA(Video Graphics Array) card, a PCI slot adjacent to 

the AGP (or PCIe) slot will become unusable.

1.3) Before installing on a newly released VGA card, please check for compatibility at 

Fatal1ty’s website* or Zalman’s website**. 

1.4) This product is not compatible with Matrox VGA cards and NVIDIA PCX 5*** VGA cards.

1.5) If the VGA card and its components interfere with the installation of this product, stop the 

installation, refer to the list of compatible VGA cards at Fatal1ty’s website* or Zalman's
website**, and install this product with one of the compatible VGA cards.

1.6) A rear case fan is recommended for enhancing the performance of this product.

* www.fatal1ty.com
** www.zalman.co.kr

Zalman Tech Co., Ltd., Fatal1ty, Inc., and any of its partners are not responsible for any 

damages due to external causes, including but not limited to, improper use, problems with 
electrical power, accident, neglect, alteration, repair, improper installation, or improper 
testing. 

2.1) Pure copper heatsink with ultra large surface area for maximum cooling performance.

2.2) 80mm fan (with red LEDs) installed in the heatsink (FHS) cools not only the VGA chipset 

and VGA RAM, but all other VGA components as well.

2.3) Quiet Mode(5V) and Performance Mode(12V) selection provided to accommodate the 

user's environment and preference.

3.1) FHS Assembly (Flower Heatsink & Fan)

3.1.1) Dimensions :     91(L) x 126.4(W) x 30(H)mm
3.1.2) Weight :

270g

3.1.3) Base Material :  Pure Copper

3.2) Fan Specifications

3.2.1) Dimensions:      80(L) x 80(W) x 15(H)mm
3.2.2) Bearing Type : 2 Ball-Bearing Sets
3.2.3) Fan Speed :

2,050 rpm ±10% (Quiet Mode), 3,500 rpm ±10% (Performance Mode)

3.2.4) Noise Level : 

23.7 dB ±10% (Quiet Mode), 36dB ±10% (Performance Mode)