ZyXEL VoIP Router Prestige 2602R-61 91-006-024004 Manuale Utente

Prestige 2602R Series User’s Guide

328 

Chapter 34 System Maintenance

Figure 206   Menu 24.10 System Maintenance: Time and Date Setting

            Menu 24.10 - System Maintenance - Time and Date Setting

          Use Time Server when Bootup= None
          Time Server Address= N/A

          Current Time:                         05 : 21 : 01
          New Time (hh:mm:ss):                  05 : 20 : 39

          Current Date:                         2000 - 01 - 01
          New Date (yyyy-mm-dd):                2000 - 01 - 01

          Time Zone= GMT+0100

          Daylight Saving= No
          Start Date (mm-dd):                          01 - 00
          End Date (mm-dd):                            01 - 00

                    Press ENTER to Confirm or ESC to Cancel:

Table 110    Menu 24.10 System Maintenance: Time and Date Setting 

Use Time Server 

when Bootup

Enter the time service protocol that your time server uses. Not all time servers 

support all protocols, so you may have to check with your ISP/network 

administrator or use trial and error to find a protocol that works. The main 

differences between them are the format. 
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of 

seconds since 1970/1/1 at 0:0:0. 
NTP (RFC-1305) is similar to Time (RFC-868).
None. The default, enter the time manually.

Time Server Address

Enter the IP address or domain name of your time server. Check with your ISP/

network administrator if you are unsure of this information.

Current Time

This field displays an updated time only when you reenter this menu.

New Time

Enter the new time in hour, minute and second format.

Current Date

This field displays an updated date only when you re-enter this menu.

New Date

Enter the new date in year, month and day format.

Time Zone

Press [SPACE BAR] and then [ENTER] to set the time difference between your 

time zone and Greenwich Mean Time (GMT).  

Daylight Saving

If you use daylight savings time, then choose Yes.

Start Date

If using daylight savings time, enter the month and day that it starts on.

End Date

If using daylight savings time, enter the month and day that it ends on

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm 

or ESC to Cancel:

”  to save your configuration, or press [ESC] at any time to cancel.