Buffalo OP-HD3.0S-3Y Dépliant

Pagina di 1
Replacement Hard Drive
NOTE:  
      
LinkStation Quad 6 TB & TeraStation ES, III and III iSCSI 6 TB models (specifically: LS-Q6.0TL/R5, TS-XE6.0TL/R5, TS-X6.0TL/R5, TS-RX6.0TL/R5 and TS-RIX6.0TL/R5) use 1.5 TB HDDs and should use OP-HD1.5T as the 
replacement drive.  For all other capacities and models, please refer to the chart above and then select the appropriate capacity. 
 
 
 
 
 
 
* Some TeraStation devices were originally supplied with 512 or 4K drives depending on when they were produced.  It is recommended to replace drives with the same sector size to maintain proper performance.  If the 
TeraStation currently has 512-byte sector HDDs, then OP-HD512-3Y replacement drives should be used.  If the system has 4K sector drives installed, then OP-HD4K-3Y should be used.  Mixing sector size hard drives inside 
the same array can lead to reduced RAID performance and is not recommended.  Specifically for TeraStation Pro WSS units, mixing sector sizes is not supported and RAID arrays cannot be rebuilt using mixed drives.
OP-HD
OP-HD512-3Y
○*
○*
○*
○*
OP-HD4K-3Y
OP-HDS-3Y
OP-HDZS-3Y
OP-HDZH-3Y
(Enterprise Class)
Scroll over
descriptions
for details
TeraStation III
TeraStation III iSCSI
TeraStation Pro
TeraStation Pro WSS
TeraStation 7120r 
Enterprise
TeraStation 5000
TeraStation 7120r
2TB   OP-HD2.0ZH
1TB   OP-HD1.0ZS
1TB   OP-HD1.0S
2TB   OP-HD2.0S
4TB   OP-HD4.0S
3TB   OP-HD3.0S
Hard Drive Capacity
500GB   OP-HD500/512
2TB   OP-HD2.0T/512
1TB   OP-HD1.0T/512
500GB   OP-HD500/4K
2TB   OP-HD2.0T/4K
1TB   OP-HD1.0T/4K
250GB   OP-HD250
3TB   OP-HD3.0T
1.5TB   OP-HD1.5T