LevelOne GTP-2880 570806 Manuale Utente

2

GTP-2880

H/W Version: 1

LevelOne GTP-2880 is a Layer 2-Plus Managed switch, 

provides 24 x 1000Base-T ports associated with 4 x SFP 

(Small Form Factor Pluggable) and 4 x 10 Gigabit SFP 

Plus slots. This switch is IEEE802.3af/at compliant, and 

provides power and data over a single Ethernet cable 

to any PoE device, with a total power budget of 185W, 

up to 30W per port. Despite its affordable pricing, the 

GTP-2880 is equipped with advanced features such as 

Single IP Management which allows users to manage 

up to 32 switches under the same web interface, 

Easy Configuration Port (ECP), IPv6, IEEE 802.1D/w/

s Spanning Tree, IEEE 802.1X Access Control, IEEE 

802.3az Green Ethernet and more. An ideal network 

solution for workgroups and edge deployments, or 

anyone looking for an affordable and efficient way to 

expand their network. 

With the design and implementation of SIP (Single IP 

Management), network administrators are allowed 

to virtually stack GEL-1072, GTL-2880, GTP-2880, 

and GTL-5280 together and manage them as one 

logical unit through a single IP address regardless of 

geographical locations of those switches. Comparing 

to traditional stacking, IP clustering eliminates the 

use of costly cables and connectors. Furthermore, it 

minimizes the impact of any single point of failure.

Each switch port can now be fully optimized through 

a predefined role and settings which are based on the 

type of a device such as an IP camera or a VoIP phone 

to be connected to. For instance, even if a surveillance 

system integrator who lacks of IT administration skills, 

can still easily enables the role and applies settings 

like VLAN, QoS, port security and spanning tree to 

all connected IP cameras on a single Web UI within a 

few minutes. Hence, simplifying network deployment 

and ensuring consistent configurations across the 

network.

We are always committed to providing the highest 

level of protection for your network resources against 

intrusion attacks and unauthorized access. Delivering 

robust access control, each Access Control List 

(ACL) consists of up to 512 entries, allowing you to 

configure a fine-grained restriction policy based on 

frame type, TCP/UDP ports, MAC address and VLAN 

ID in order to get deep inspection on your network 

traffic. In addition, with the implementation of port-

based authentication (IEEE 802.1X), messages can 

be encrypted, therefore preventing intruders from 

getting authentication credentials.

Featuring Power over Ethernet Plus (PoE+) 

technology (IEEE 802.3at), which nearly doubles the 

power delivery comparing to the IEEE 802.3af PoE 

technology. Furthermore, it ensures that the power is 

used more efficiently due to the maximum power will 

only be requested when it is needed. Thus providing 

great cost savings by reducing power bills and 

eliminating the need for additional power cables and 

outlets.

1. LED Indicators

2. Mode Button

3. 10/100/1000Mbps RJ-45 LAN Ports

4. SFP (Mini-GBIC) Slot

1 2

3

4

4

5

6

5. RS-232 Port

6. Power Socket