Casio W-201-2AVEF Dépliant

2

The Dual Time Mode lets you keep track of time in a different time zone.

• In the Dual Time Mode, the seconds count is synchronized with the seconds count

of the Timekeeping Mode.

To set the Dual Time
1. Press B to enter the Dual Time Mode.
2. Hold down A until the hour setting starts to flash,

which indicates the setting screen.

3. Press B to move the flashing between the hour and

minutes settings.

4. Press C to increase the setting. Holding down C

changes the setting at high speed.

5. Press A to exit the setting screen.

An LED (light-emitting diode) and light guide panel
illuminate the entire display for easy reading in the dark.

• See “Illumination Precautions” for other important

information.

To illuminate the display
In any mode, press L to illuminate the display.

• You can specify 1.5 seconds or three seconds as the

illumination duration. See “To specify the illumination
duration” for more information.

To specify the illumination duration
In the Timekeeping Mode, hold down C for about two seconds to toggle the
illumination duration between three seconds (

 displayed) and 1.5 seconds

(

 not displayed).

• Pressing C also toggles between 12-hour and 24-hour timekeeping.

• When the three-second setting is selected, the three-second (

) indicator

remains on the display in all modes.

• To protect against running down the watch’s battery, the watch automatically

switches to the 1.5-second setting about seven hours after the three-second setting
is selected. To continue to use the three-second setting, perform the above
procedure again.

This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.

Auto return features
If you leave a screen with flashing digits for one or two minutes without performing
any operation, the watch automatically saves any settings you have made up to that
point and exits the setting screen.

• Illumination may be hard to see when viewed under direct sunlight.

• Illumination automatically turns off whenever an alarm sounds.

• Frequent use of illumination runs down the battery.