Gamber-Johnson 7160-0364 Dépliant
Placement
Tilt
Swivel
Weight
Height
Width
Depth
Attaches to rectangular forklift
support braces 1.5" to 2.5" wide
Yes - 0-90 Clevis up to 90°
fore/30° aft
Yes - Clam Shell up to 160°
Motion Attachment - 360°
Entire arm - 360°
7.25 lbs.
8.1"
8.1"
9.5"
Forklift 0-90 Clevis Features:
• Heavy gauge steel construction for long-term durability in a rugged environment
• Black powdercoat fi nish for maximum corrosion resistance
• The entire arm can rotate around 360° and the Motion Attachment can also rotate 360°
• Arm extends 3” bringing equipment closer to the user
• Arm can be tighten down to be locked into a permanent position
• Tilt capabilities:
• Black powdercoat fi nish for maximum corrosion resistance
• The entire arm can rotate around 360° and the Motion Attachment can also rotate 360°
• Arm extends 3” bringing equipment closer to the user
• Arm can be tighten down to be locked into a permanent position
• Tilt capabilities:
• 90° forward allows for tablets to be easily mounted
• 30° aft movement with a positive stop at 30°
• Riveted design allows for smoother tilt movement
• 30° aft movement with a positive stop at 30°
• Riveted design allows for smoother tilt movement
• Easier installation:
• Open throat design for ease of mounting to docking stations and cradles
• Can be mounted directly to any
• Open throat design for ease of mounting to docking stations and cradles
• Can be mounted directly to any
Clam Shell (Item No. 7160-0357, 7160-0370, 7160-0371)
Small Plate Features:
• Heavy gauge steel construction for long-term durability in a rugged environment
• Black powdercoat fi nish for maximum corrosion resistance
• Black powdercoat fi nish for maximum corrosion resistance
• Clam Shell
features the following hole patterns: AMPS, NEC and 75mm VESA
• The
Clam Shell
can be tilted up or down for a total of 160°
• To tilt the
Clam Shell
simply loosen the adjustable lever, tilt to desired position and then re-tighten the lever
• A secondary bolt is included to lock the clam shell into a permanent position
• Plate sandwiches the forklift support brace and allows user to position the device at the desired height position
• Plate sandwiches the forklift support brace and allows user to position the device at the desired height position
D
W
H
Item No.
7160-0364
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209
Email: gamberj@gamberjohnson.com | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2013 Gamber-Johnson LLC
consent of Gamber-Johnson’s Marketing Department. © Copyright 2013 Gamber-Johnson LLC
FORKLIFT MOUNT:
FORKLIFT MOUNT:
0-90 CLEVIS WITH SMALL PLATE
0-90 CLEVIS WITH SMALL PLATE
0-90 CLEVIS WITH SMALL PLATE