Nortel Digital Mobility Controller NT7B80AAE5 Manuale Utente

Product Bulletin

Nortel Digital Mobility Solution

Technical Specifications

Physical specifications

12.75 in., 324 mm

8.625 in., 219 mm

2.625 in., 67 mm

DMC080 2 lb. 2.4 oz., 975 grams
DMC320 2 lb. 10.0 oz., 1191 grams

Status and Power

Desk top, wall mount or rack mount

AC input: 100-240V, 2A, 50-60 Hz
DC output: 19V, 6.32A

0°C to 40°C

90-95% RH at 40°C

-55°C to 70°C

90-95% RH at 40°C

Mechanical requirements

Packaged

• Transportation vibration as per Telcordia GR-63 (Section 5.4.3,

Figure 4-3, Curve 2)

• Transportation bounce as per IEC 68-2-55 (Method A)

• Drop as per ISTA Procedure 1A 

Unpackaged

• Office vibration as per Telcordia GR-63 (Section 5.4.2, Electronic

Subassemblies)

• Mechanical shock as per IEC 68-2-27 (Test Ea)

• Drop as per IEC 68-2-32 (Test Ed)

Electromagnetic emissions

Digital Mobility equipment meets all FCC Part 15, Class A radiated
and conducted emissions requirements. Does not exceed the Class
A limits for radiated and conducted emissions from digital apparatus
as set out in the Radio Interference Regulations of Industry Canada.

Electromagnetic compliance

The Digital Mobility Controller fully complies with the following
standards and specifications:

ICES-003 Class A using:
— CISPR 22 (1997) Class A
— ANSI C63.4 (2001) method

FCC Part 15 Subpart B Class A using:
— CISPR 22 (1997) Class A
— ANSI C63.4 (2001) method

— EN55024 (1998 w/A1:01 & A2:03)/CISPR

24 (1997) excluding Annex A

— EN55022 (1998) Class A
— EN61000-3-2 (2001)
— EN61000-3-3 (1995 w/A1:98)

AS/NZS CISPR 22 (2002) Class A using:
— EN55022 (1998) Class A

VCCI (April 2000) Class A using:
— CISPR 22 (1997)
— ANSI C63.4 (2001) method

CNS 13438 Class A

Safety

• CSA 22.2 No. 60950

• UL 60950

• IEC 60950 (including all national and group deviations)

*

Also apply to base stations, repeaters and handsets.