Samsung MZMPC128HBFU-00000 Manuale Utente

- 25 -

        datasheet

This word of bit flags describes the S.M.A.R.T. capabilities of the device. The device will return 03h indicating that the device will save its Attribute Values 
prior to going into a power saving mode and supports the S.M.A.R.T. ENABLE/DISABLE ATTRIBUTE AUTOSAVE command.
Bit            Definition
0              Pre-power mode attribute saving capability. If bit = 1, the device will save its Attribute Values prior to going into a power 
                saving mode (Standby or Sleep mode).
1              Attribute auto save capability. If bit = 1, the device supports the S.M.A.R.T. ENABLE/ DISABLE ATTRIBUTE AUTOSAVE          
                command.
2-15        Reserved (0)

Bit           Definition
7-1          Reserved (0)
0              The Error Logging support bit. If bit = 1, the device supports the Error Logging

This byte indicates the section of self-test where the device detected a failure.

These bytes are the minimum time in minutes to complete the self-test.

The Data Structure Checksum is the 2's compliment of the result of a simple 8-bit addition of the first 511 bytes in the data structure.

 

The following defines the 512 bytes that make up the Attribute Threshold information. This data structure is accessed by the host in its entirety using the 
S.M.A.R.T. Read Attribute Thresholds. All multibyte fields shown in these data structures follow the ATA/ATAPI-6 specification for byte ordering, that is, 
that the least significant byte occupies the lowest numbered byte address location in the field. 

The sequence of active Attribute Thresholds will appear in the same order as their corresponding Attribute Values.

This value is the same as the value used in the Device Attributes Values Data Structure.

0~1

Data structure revision number

2~361

1st - 30th Individual attribute data

362 ~ 379

Reserved

380 ~ 510

Vendor specific

511

Data structure checksum