Samsung MZMPC128HBFU-00000 Manuale Utente
- 5 -
datasheet
SSD
Rev. 1.0
MZMPC032HBCD-00000
MZMPC064HBDR-00000
MZMPC128HBFU-00000
MZMPC256HBGJ-00000
1.0 General Description
The NSSD(Nand based Solid State Drive) of Samsung Electronics fully consists of semiconductor devices using NAND Flash Memory which provide high
reliability and high performance for a storage media.
The NSSD doesn't have any moving parts such as platter(disk) and head media, which provides a better solution in a notebook PC and Tablet PC for a
storage device providing higher performance, reduced latencies, and a low power consumption in a small form factor. The NSSD could also provide rug-
ged features in industrial PC with an extreme environment with a high MTBF.
reliability and high performance for a storage media.
The NSSD doesn't have any moving parts such as platter(disk) and head media, which provides a better solution in a notebook PC and Tablet PC for a
storage device providing higher performance, reduced latencies, and a low power consumption in a small form factor. The NSSD could also provide rug-
ged features in industrial PC with an extreme environment with a high MTBF.
For easy adoption, the NSSD has the same host interface with Hard Disk Drives and has a same physical dimension.
•
NSSD Functional Block Diagram
•Density
− 32/64/128/256GB is available
•Form Factor
− Full Mini PCIe type
− (29.85 ± 0.15 x 50.80 ± 0.15 x 3.75 ± 0.10)mm
•Host interface
− Serial ATA interface of 6.0Gbps
− Fully complies with ATA/ATAPI-7 Standard
(Partially Complies with ATA/ATAPI-8)
− Power Saving Modes: HIPM, DIPM (Partial / Slumber mode)
− Support NCQ : Up to 32 depth
− Synchronous Signal Recovery
•Performance
− Host transfer rate: 600 MB/s
− Sequential Read : Up to 500MB/s (32/64/128/256GB)
− Sequential Write : Up to 260MB/s (256GB), Up to 255MB/s (128GB),
Up to 170MB/s (64GB), Up to 90MB/s (32GB)
* Actual performance may vary depending on use conditions and
environment
* Notes :
1. Performance measured using IOmeter 2008 with queue depth 32
2. Measurements are performed on whole LBA range
3. Write cache enabled
4. 1MB/sec = 1,048,576 bytes/sec was used in sequential performance
environment
* Notes :
1. Performance measured using IOmeter 2008 with queue depth 32
2. Measurements are performed on whole LBA range
3. Write cache enabled
4. 1MB/sec = 1,048,576 bytes/sec was used in sequential performance
•Power Consumption
− Active* : 911mA/3.007W
− Idle** : 27mA/0.087W
* Active power is measured during execution of Mobilemark 2007 in
Windows7
** DIPM enabled value
*** Environment
Windows7
** DIPM enabled value
*** Environment
− System : Intel Core i5-2540M@2.60Ghz, DDR3 4GB
− OS : Windows 7 x64(script : Autoconfig 2.4.1)
− External 3.3V provided for mSATA
•Temperature
− Operating : 0°C to 70°C
*Measuring at the center of module’s top
•Shock
− Shock : 1500G, duration 0.5ms, Half Sine Wave
− Vibration : 7~800Hz, 3.08Grms, 30min/axis(X,Y,Z)
* Applicable only for cased product
•MTBF
− 1,500,000 Hours
•Weight (TBD)
− 32GB : Max 7g
− 64/128/256GB : Max 8g