Calrad Electronics 40-998-HS Manuale Utente

186

IR Connecting hub with a wired receiver that terminates to a
3.5mm stereo plug. A terminal block is also provided to support
wired type receiver connections if needed. Designed to simplify
the connection of IR receivers and emitters for IR signal
distribution. The 92-160 has the ability to send IR signals to 6
sources using a single emitter or 12 or more sources if double or
triple IR emitters are used.Three colored LED indicators show
power status, IR signal and IR confirmation. Comes with one
receiver and one emitter, 12 VDC supply.

IR connecting block supports wired type IR receiver connections
and 3.5mm IR emitters for IR signal distribution.

Same as 92-160 but with flush mount wall receiver.

Includes 1 distribution block, 1 flush mt. receiver,  IR emitter.
Includes 12 Vdc 300ma power supply.
DC Power Supply positive center.
6 3.5 mm Mono IR emitter outputs.
1 Detachable, 4 conductor IR receiver input connector
2 3.5mm Stereo Jack IR Receiver input
Dimensions, IR Receiver: L-2.13”, W-.56”, H-.52”
Dimensions, Distribution Block: L-1.95”, W-2.25”, H-.95”
Distribution Block weight: 6 oz.
Power supply input 120 VAC 60 Hrz
Power supply output 12VDC Positive Center

Features 3 position spring terminals  for

IR Emitters or Stereo Audio. Accepts up

to 22ga. solid wire. Color: White.

Features 3 position spring terminals,

V+, V-, signal. Frequency: up to47KHz,

Voltage 9-12Vdc, Current draw: 22mA,

receiver max distance 30 feet, IR

receiving offset: 120°.  Accepts up to

22ga. solid wire. Red LED provides

clear indication of Signal reception.

Color: White.  

Compact 2 port IR repeater kit provides a simple system to
control equipment located in a closet, equipment rack, or behind
you, or even in another room. This kit requires a IR receiver, use
Calrad 92-164keystone IR receiver or 92-165 surface mount IR
receiver, (Not Included) and single or double IR emitters, 92-152
(Single Emitter), 92-152-2 (Double Emitter), (Not Included).