Toshiba DK Backup Manuale Utente
7
Installing DKAdmin
Installing DKAdmin
2
Step 1: Check System Requirements
For optimum performance, run DKAdmin on a personal computer with the following
minimum specifications:
minimum specifications:
♦
IBM-compatible Pentium® personal computer
♦
100MB or larger hard drive
♦
CD-ROM or 3.5" 1.44KB high-density floppy drive
Note
DKAdmin software is distributed on a CD-ROM disk. Installation can be performed
using the CD-ROM disk or from floppy disk(s) copied from the CD-ROM DKAdmin
install program.
using the CD-ROM disk or from floppy disk(s) copied from the CD-ROM DKAdmin
install program.
♦
VGA or SVGA monitor preferred
♦
4MB RAM (minimum)
♦
Microsoft
MS-DOS
6.22, Windows
3.11 or higher (Windows 95, 98 or Windows
NT
4.0 recommended).
♦
A laser printer is recommended
♦
For network users, a minimum of 2MB of disk space is required for each person using
DKAdmin on the network.
DKAdmin on the network.
♦
DKAdmin hardware key (red)
DKAdmin is a MS-DOS program that can be installed and run under Microsoft Windows 3.11,
95, 98 and NT or MS-DOS (6.22 or higher)
95, 98 and NT or MS-DOS (6.22 or higher)
.
The installation and run instructions in this
chapter include both Windows and DOS installation information.
Important!
●
If your PC has Windows 3.11 installed, setting your Windows SYSTEM.INI and DOS
CONFIG.SYS files with the commands below may help DKAdmin run on your PC.
CONFIG.SYS files with the commands below may help DKAdmin run on your PC.
SYSTEM.INI
[NonWindowsApp]
[NonWindowsApp]
COMMANDENVSIZE=1024
DOS CONFIG.SYS
SHELL=C:\COMMAND.COM
/e:1024
/p
●
If DKAdmin displays a “Run time error” message during installation or operation, erase
all “ntx” files under the customer directory (XXX.DK) and the “data” directory.
all “ntx” files under the customer directory (XXX.DK) and the “data” directory.
Get user manuals:
See SafeManuals.com