Toshiba IK-TF5C Manuale Utente
28
(3. 2) Pulse Width Trigger SYNC-NON RESET Picture Output Timing (at Time of Internal Sync)
*1: Externally input signal
*2: Exposure time = Trigger pulse width + 6
µ
s
(Valid trigger pulse width is 2
µ
s or greater for external trigger shutter operation.)
*3: Video is output at the falling edge of the internal VD following completion of the exposure period.
The video and FVAL/LVAL/DVAL have a paired relationship.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig-
ger, there will be an effect on the video.
ger, there will be an effect on the video.
About 1
µ
s
Exposure period*
2
Trigger*
1
Exposure period*
2
Negative polarity mode
Positive polarity mode
About 7
µ
s
(Internal VD)
RGB data
(video interval image)
FVAL
LVAL,
DVAL
DVAL
20H (Partial scanning OFF)
18H (Partial scanning 120fps)
23H (Partial scanning 180fps)
18H (Partial scanning 120fps)
23H (Partial scanning 180fps)
The internal VD falling edge is within the
exposure period and thus video is not output. *
exposure period and thus video is not output. *
3
#IK-TF5C_EN.p65
06.11.30, 3:44 PM
Page 28
Adobe PageMaker 6.5J/PPC