Toshiba R30-A Manuale Utente

142

If Something Goes Wrong

Problems when you turn on the computer

The computer displays the 

WARNING RESUME 

FAILURE/

Windows Error Recovery – Windows did not shut down 

successfully message.

To continue, select 

Start Windows normally

. This can 

happen if the computer was put into Sleep mode and the 
battery has discharged. If you performed a shutdown before 
this message was displayed, a program or driver may have 
prevented Windows

®

 from shutting down.

Data stored in the computer’s memory has been lost. Data 
stored in the computer’s internal storage drive may not be 
affected.

Always save your data even when you are using Sleep 
mode. If your battery fully discharges, information that has 
not been saved will be lost. Your computer can be 
configured to warn you when the battery is running low see 

. 

If you are running on battery power, it is recommended that 
you do not leave the computer in Sleep mode for long 
periods of time.

To charge the battery, leave the computer plugged into a live 
wall outlet for several hours. For more information see 

The AC power light is blinking.

If the AC power light is blinking, try the following steps:

1

Connect the AC adaptor to a different power outlet, 
preferably in a different room. If the computer starts 
normally, there may be a problem with the AC outlet 
itself, or the voltage level available from it.

2

Verify that the AC adaptor is the correct unit for your 
computer model. The computer may not be able to start 
from an AC adaptor that is rated for less current 
(amperage) than the computer requires, even if the rated 
voltage is correct, and the plug fits correctly in the DC-IN 
socket. The labels on the bottom of the computer and 
the AC adaptor show the specifications for voltage (“V”) 
and current (“A”) for each device. The voltage level must 
match exactly. The amperage rating of the AC adaptor 
must be equal to or greater than that required by the 
computer.