TP-LINK TL-WN7200ND Manuale Utente

 

- 16 -

 

)

To build a successful connection by QSS, you should also do the corresponding configuration of 

the Access Point for QSS or WPS function meanwhile. 

If your Access Point is equipped with a push-button for Wi-Fi Protected Setup, you can connect 

the adapter to the Access Point by Push QSS Button method. 

Step 1  Press the QSS button on your Access Point device. 

Step 2  Click the QSS button (marked by the red circle) on the screen as Figure 3-9. 

 

Figure 3-9 QSS- QSS BUTTON mode 

Or:  Press and hold the QSS button on the adapter (shown on the following figure) for 2 or 3 

seconds. 

 

If your Access Point supports Wi-Fi Protected Setup and the PIN method, you can add the 

adapter to the network by the following two ways: