TP-LINK TL-SG3216 Manuale Utente
Figure 13-15 Network diagram
¾
Configuration Procedure
z
Configure the member switch
Step Operation
Description
1
Enable NDP function on the
switch and for port 1
switch and for port 1
On Cluster→NDP→NDP Config page, enable NDP
function.
function.
2
Enable NTDP function on the
switch and for port 1
switch and for port 1
On Cluster→NTDP→NTDP Config page, enable
NTDP function.
NTDP function.
z
Configure the commander switch
Step Operation
Description
1
Enable NDP function on the
switch and for port 1, port 2 and
port 3
switch and for port 1, port 2 and
port 3
On Cluster→NDP→NDP Config page, enable NDP
function.
function.
2
Enable NTDP function on the
switch and for port 1, port 2 and
port 3
switch and for port 1, port 2 and
port 3
On Cluster→NTDP→NTDP Config page, enable
NTDP function.
NTDP function.
3
Create a cluster and configure
the related parameters
the related parameters
On Cluster→Cluster→Cluster Config page, configure
the role as Commander and enter the related
information.
IP pool: 175.128.0.1
Mask: 255.255.255.0
the role as Commander and enter the related
information.
IP pool: 175.128.0.1
Mask: 255.255.255.0
193