Triarch 31741/16 Manuale Utente

 

 

 

 

 

 

1.  Before beginning the assembly, carefully unpack and identify all parts referring to the illustration. 
2.  Unravel the supply power and ground wires and pass the holes of fixture loop. Thread the fixture 

loop onto the coupling at the top of fixture body. Hand tightens until snug. 

3.  Thread the top of stem into the coupling at the underside of fixture body. Hand tightens until snug. 
4.  Install proper bulbs (not provided) to the sockets referring to the markings and labels on fixture for 

maximum wattage. 

5.  Locate the tube, cap A, check ring, glass, rubber washer and steel washer. Carefully pass the 

center holes of tube, cap, glass, rubber washer and steel washer through the stem and secure 
with hex nut. 

6.  Install cap B through the protruding stem and secure with finial. 
7.  Restore power to the installation point ON. Retain this sheet for future reference. 

 

 

 

01.06 

   Page 1 of 2 

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!

FIG. 1

Fixture loop

Glass

Finial

Cap B

Steel washer

Hex nut

Rubber washer

Check ring

Cap A

Tube

Stem

Fixture body