Triarch 31634 Manuale Utente

 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.  Thread the LOOP (A) onto the NIPPLE (B). Until tighten! 
2.  Put down the SMALL FRAME (F) onto the fixture! See the FIGURE 1 FIGURE 2 

& FIGURE 3. Please pay more attention to do not scratch the finish.       

3.  Unfold the arms to the correct place to match the FRAME (F) & FRAME (J). 
4.  Thread the NIPPLE (I) onto COUPLEN (H). Until tighten! 
5.  Place the SMALL FRAME (F) & BIG FRAME (J) onto the fixture careful. Make 

sure all of the NIPPLE (I) hade insert the tubings on the FRAME. 

6.  Place the COVER (K) onto the FRAME. Then secured by the BALL NUT (L). 
7.  Measure the height from hanging fixture to your ceiling. Cut the excess chain 

and wire to fit the height. 

8.  Follow the wattage label on the glass hold and install correct wattage and type 

bulb (no provide) onto the socket. 

9.  For mounting and wiring step please follow the mounting instruction sheet 

enclosed.