Trimble Outdoors r7 Manuale Utente

Trimble R7/R8 GPS Receiver User Guide     8 9

Default Settings     9

If the Trimble R7 loses power unexpectedly, when power is restored 
the receiver tries to return to the state it was in immediately before the 
power loss. The receiver does not reset itself to defaults or apply any 
Power Up settings. If the receiver was logging when power was lost 
unexpectedly, it resumes logging when power is restored.

However, when you switch the receiver off using 

p, the receiver 

behaves as if you pressed 

d to stop logging before you pressed p. 

In this case, when power is restored normally, logging does not begin 
until you start it manually.

You can disable logging by setting the receiver’s data logging and 
position logging rates to Off. However, if you press 

d while logging 

is disabled, the receiver will still log data, using the default logging 
settings.

unexpectedly

resumes 
automatically

the last settings 
used

the last settings 
used

when you press 

p

does not resume

the factory 
defaults

the last settings 
used

d

using the Trimble Survey Controller or GPS 
Configurator software

the factory defaults

in the Power Up application file

the factory defaults