Trimble Outdoors r7 Manuale Utente

7       Software Utilities

7 2      Trimble R7/R8 GPS Receiver User Guide

WinFlash can be installed from the Trimble R7, Trimble R8, 5700, and 
5800 GPS Receivers CD, or from the Trimble website. 

1.

Insert the disk into the CD drive on your computer.

2.

From the main menu select Install individual software 
packages.

3.

Select Install WinFlash vX.XX with Trimble R7 drivers and 
firmware.

4.

Follow the on-screen instructions.

Your Trimble R7 receiver is supplied with the latest version of receiver 
firmware installed. If a later version becomes available, upgrade the 
firmware installed on your receiver.

WinFlash guides you through the firmware upgrade process. The steps 
required are described below. For more information, refer to the 
WinFlash Help.

To upgrade the Trimble R7 receiver firmware:

1.

Start WinFlash. 

The Device Configuration screen appears.

2.

From the Device type list select Trimble R7 Receiver.

3.

From the PC serial port field select the serial (COM) port on 
the computer that the receiver is connected to.

4.

Click 

.