Trimble Outdoors r7 Manuale Utente

7       Software Utilities

7 6      Trimble R7/R8 GPS Receiver User Guide

9.

When you have configured all the frequencies you require, click 

.

WinFlash updates the receiver radio frequencies and then 
restarts the receiver.

To configure the internal 900 MHz radio, use one of the following:

•

Trimble Survey Controller running on a Trimble controller

•

WinFlash (provided on the Trimble R7, Trimble R8, 5700, and 
5800 GPS Receivers CD)

The internal radio has 40 selectable networks. You must choose the 
same network that is configured in the base radio you want to receive 
from.

To configure the radio network using Trimble Survey Controller:

1.

Connect the data/power cable to the controller and the receiver 
and turn on the controller. The receiver starts automatically.

2.

From the main menu on the controller, select Configuration.

3.

In the dialog that appears, select Survey styles, then from the 
Type field, select RTK.

4.

Select Rover radio, then from the Type field select Trimble 
Internal.

5.

Tap the 

!

 softkey.

6.

Once connected, in the Network number field enter the number 
of the network set on your base radio.

7.

Tap the 

E

 softkey to complete configuration.