Tripp Lite B020-008 Manuale Utente

4

• A VGA, SVGA or Multisync card.

Note:  On the B020-016 and B020-008, since the integrated LCD monitor’s maximum resolution is 1024 × 768, the computer’s resolution 
setting must not exceed 1024 × 768. The B020-016-17 and B020-008-17 have a maximum resolution of 1280 x 1024, so the computer's 
resolution setting must not exceed 1280 x 1024. 

• A 6-pin mini-DIN (PS/2 style) mouse port or USB Port.*

• Either 

1. a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and ground on pin 3 

2. a 5-pin DIN (AT Style) keyboard port with +5V DC on pin 5 and ground on pin 4.*

3. a USB port*

* See the note under Cables in the next section.

• A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any 

system in the installation.

• A PS/2 style mouse

• A PS/2 style keyboard

This KVM switch requires the following custom-wired premium cables: 

Note:  1. The KVM Switches do not support serial mice. Using a Serial-to-PS/2 adapter will not work.

2. If your computer has an AT-style keyboard socket, use a PS/2-to-AT keyboard adapter (Tripp Lite #P106-000) to enable the 

keyboard to plug the keyboard cable into the computer’s keyboard port.

To Connect a PS/2 Computer to the KVM

P774-006  6' Cable

P774-010  10' Cable
P774-015  15' Cable

To Connect a USB Computer to the KVM

P776-006  6' Cable

P776-010  10' Cable

USB Adapter (connects a USB system to the 

B015-000

P774 series KVM cable)

Daisy-Chain Cables

P772-002  2' Cable
P772-006  6' Cable

200506056 93-2463 Console KVM OM.qxd  6/29/2005  12:30 PM  Page 4