JVC HR-J278EU Manuale Utente
Filename [HRJ278EU1.fm]
Masterpage:Left
12
EN
PLAYBACK
Basic Playback
A
Load a cassette.
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointed toward the recorder.
facing you and the arrow on the front of the cassette is
pointed toward the recorder.
● Don’t apply too much pressure when inserting.
● The recorder’s power comes on automatically and the counter
is reset to 0:00:00.
● If the record safety tab has been removed, playback begins
automatically.
B
Find the programme start point.
If the tape is advanced past the start point, press
3
. To
go forward, press
5
.
C
Start playback.
Press
4
. “bESt” appears blinking in the recorder’s front
display panel during automatic tracking. (
墌
pg. 19)
D
Stop playback.
Press
8
on the remote control or
0
on the recorder’s
front panel. Then press
0
to remove the cassette.
Turn on the TV and select the video channel (or
AV mode).
AV mode).
Clean the video heads using a dry cleaning
cassette — TCL-2UX — when:
cassette — TCL-2UX — when:
● Rough, poor picture appears while a tape is played back.
● The picture is unclear or no picture appears.
● “USE CLEANING CASSETTE” appears on the screen (only
with “O.S.D.” set to “ON” (
墌
pg. 27).
Usable cassettes
● Compact VHS camcorder recordings can be played on this
video recorder. Simply place the recorded cassette into a
VHS Cassette Adapter and it can be used just like any full-
sized VHS cassette.
VHS Cassette Adapter and it can be used just like any full-
sized VHS cassette.
● This video recorder can record on regular VHS and Super
VHS cassettes. However, it will record and play back
regular VHS signals only. It is not possible to play back a
recorded Super VHS tape.
regular VHS signals only. It is not possible to play back a
recorded Super VHS tape.
HRJ278EU1.fm Page 12 Thursday, February 22, 2001 1:32 PM