JVC HR-V200AA Manuale Utente

Page 7

July 17, 2003 8:53 am

— 7 —

Playing back tape repeatedly (100 times)
— Repeat Play

During playback, press and hold 4 for more than 5 seconds. The
play indicator (

) on the display panel starts blinking slowly. To

stop playback, press 8 on the remote control or 0 on the
recorder.

NOTE:

Pressing 4, 3, 5 or 9 also cancels repeat playback.

Locating beginning of recordings
— Index Search

Index codes are placed on the tape at the beginning of each
recording when recording on this recorder.

While the tape is not running, press w or

on the remote

control to start search.

To access a recording of 2 to 9 index
codes away, press

repeatedly

until the correct number is displayed
on the screen (only if “O.S.D.” is set to
“ON” (

墌

11)). Playback begins

automatically when the desired
recording is located.

Locating beginning of timer recordings
— Instant Review

After ensuring that the recorder is turned off and that the timer
mode is disengaged, press REVIEW on the remote control.

● The recorder turns on, and rewinds to the index code indicating

the beginning of the last timer-recorded program, then begins
playback automatically.

● You can access a program of 2 to 9 index codes away from the

current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press
REVIEW three times.

● The Instant Review function will also operate if the recorder is

turned on.

Skipping unwanted portions
— Skip Search

Press 30 SEC

on the remote control once to 4 times during

playback. Each press initiates a 30-second period of high speed
playback (up to 2 minutes). When the specified portion of the tape
is skipped, normal playback resumes automatically. To return to
normal playback during Skip Search, press 4.

Recording

Accidental erasure prevention

To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.

Basic Recording

Load a cassette

Make sure the record safety tab is intact. If not, cover the hole
with adhesive tape before inserting the cassette.

● The recorder turns on, and the counter is reset, automatically.

● Select the appropriate colour system with “PAL/MESECAM” and

“NTSC” in Function settings (

墌

10).

Select recording channel

Press PR r/t or the Number keys on the remote control or
PR +/– on the recorder.

NOTE:

You can select channel in the stop mode, recording pause mode
or during rewind/fast-forward.

Set tape speed

Press p(SP/LP/EP). The current setting for the tape speed
appears on the display panel and the screen for about 5 seconds.
Press p(SP/LP/EP) again to change the setting while tape speed
is displayed.

Start recording

On the recorder, press 7. Or on the remote control, while holding
7, press 4.

NOTE:

If the tape reaches its end during recording, the recording stops
and “

䡬

” and “ $” blink on the display window. Press 0 on

the recorder to eject the cassette or press 3 on the remote
control to rewind the tape.

6 2

2nd next

Beginning of the

current program

recorded

Current
position on
the tape

Beginning of the
2nd next program
recorded

program

recorded

program

recorded

Turn on the TV and select the video channel or AV mode.

During recording

Pause recording

Press 9.

● Press 4 to resume recording.

● You can select channel in the recording pause mode.

Stop recording

Press 8 on the remote
control.

OR Press 0 on the recorder.

Record safety tab

– Playback –

HR-V400AG-EN.fm Page 7 Thursday, July 17, 2003 8:53 AM