Sceptre Technologies X24 Manuale Utente

Page44                                                  SCEPTRE   X24 

 

This function adjusts many loose options inside the monitor. 

 
 
 
 
 
 
 
 
 
 
 

1. Press 

M to open the OSD then highlight MISCELLANEOUS by pressing with the (▲/+) or 

(▼/–) buttons. 

2. Press 

M to enter the function. 

3. 

Press with the (▲/+) or (▼/–) buttons to select the option you want to adjust and press M to 
adjust the function. 

4. Press 

the 

(▲/+) or (▼/–) buttons to adjust the value of the option. 

i.  SHARPNESS – This option adjusts the sharpness of the graphics and text. 

ii.  INPUT SELECT – This option lets you select the input you want. 

iii.  OVER DRIVE – This option helps increase pixel response time reducing 

ghosting effects. 

iv.  DCR – This option turns dynamic contrast on or off. 

v.  DISPLAY INFORMATION – This option shows the monitor’s information 

such as resolution and refresh rate. 

 
Please Note :   
 

• 

You can switch sources easily by using the SOUCE button on the side of the 
monitor. 

• 

The DCR function automatically controls the BRIGHTNESS of the monitor, 
therefore, when this function is enabled, you will not be able to adjust the 
values in the BRIGHTNESS function. 

 

This function exits the OSD menu. 
 

1.  Select the EXIT function with the 

 or 

 buttons and press M to 

exit.