Roland VS-1680 Manuale Utente
21
Editing an automix
NOTE
Even if there is only one marker for the automix data that you wish
to copy, press the button in the order of [F1 (In)]
→
[F1 (Out)] at
the same marker location.
MEMO
You can rotate the TIME/VALUE dial to modify the automix
setting value at the cursor location. If you wish to re-select
the automix data that will be copied, press [
].
9. Press [F3 (Copy)].
10. Use [
][
][
][
] to move the cursor. Rotate
the TIME/VALUE dial.
fig.4-08
Target
This will indicate the type of automix data that you selected
to be copied in step 6. If you wish to copy all automix data,
use the TIME/VALUE dial to select “All Level and Pan.”
Destination Target
Select the copy destination for the automix data.
MEMO
There is no limitation on the copy-source and copy-
destination data. For example you can copy the volume level
data (0–127) from a track, and overwrite it onto the pan data
(L63–0–R63). However, if you do so, the results may not be as
you expect.
Destination Mark
Select the first marker of the copy destination.
The markers that had originally been assigned to the copy
destination will remain, but the data will be rewritten. Also,
the markers from the copy source will be added.
fig.4-10.e
6, 10
:
The automix data of the copy-destination markers
will be rewritten.
7, 9, 11
:
Since copy-source markers corresponding to the
copy-destination markers do not exist, the
automix data will be erased.
8, 12
:
Markers with automix data will be created.
11. To copy the data, press [F4 (Exec)]. If you press
[F6 (EXIT)], you will return to step 7 without copying the
data.
12. A message will ask for confirmation. Press [YES]. If you
press [NO], the data copy operation will be halted, and
you will return to step 11.
fig.4-11
13. When the data has been copied, the display will indicate
“Complete.” Press [PLAY (DISPLAY)].
Smooth data transitions
(Gradation)
(Gradation)
This operation creates auto-mix data that smoothly connects
the first automix marker in the specified area with the last
marker.
fig.4-12.e
NOTE
Editing of the automix data cannot be cancelled by the Undo
function (VS-1680 Owner’s Manual, p. 160).
Copy area
Destination Marker
1
2
3
4
5
6 7
8 9 10
11
Destination Marker
1
2
3
4
5
6 7
9 10 11
13
8
12
0
M1
M7
Time
Gradation area
0
M1
M7
Time
Gradation area